Klingspor's Woodworking Shop (Locations) Ad #1

Special Events in the next 30 days

Results 1 to 7 of 7
  1. #1
    Senior User
    DQ
    tdukes's Avatar
    Nickname
    Eddie
    Join Date
    Nov 2017
    Location
    Lexington, SC
    Posts
    449
    Visit Freq
    6.73 visits/week
    Threads
    81
    Classifieds
    0

    Cast iron cleaning

    Hello,

    I'm sure some, if not most, have done this before so maybe it will help someone that hasn't.

    It has been a while since I cleaned and polished my table saw's cast iron top. Glue, sweat, humidity really takes it's toll.

    Got out my ROS sander with 320 grit and WD-40 and went to work. Probably should have started with 220 grit, then 320.

    Cleaned the top with mineral spirits after the sanding and applied a coat of paste wax. Have to say, it has never been this slick when it was new.

  2. The following user says Thank You to tdukes for this useful post:


  3. #2
    Corporate Member
    DQ
    sawman101's Avatar
    Nickname
    Bruce Swanson
    Join Date
    Feb 2009
    Location
    Newton, NC
    Posts
    2,920
    Visit Freq
    6.85 visits/week
    Threads
    176
    Classifieds
    0

    Re: Cast iron cleaning

    I like to keep my tables shiny and slick. I often use a product such as Top Saver along with a 3M green scouring pad. If it is rusted and pitted, I'll use 180 in my ROS and then the 3M pad, followed by a clean rag, then the paste wax, if the top cleaning agent isn't a final surface treatment.
    Experience is a hard teacher; she gives the test first, and the lesson later.

  4. The following 2 users say Thank You to sawman101 :


  5. #3
    Staff Advisor
    Corporate Member
    DQ
    Joe Scharle's Avatar
    Nickname
    Joe (75)
    Join Date
    Sep 2005
    Location
    New Bern, NC
    Posts
    5,527
    Visit Freq
    6.19 visits/week
    Threads
    685
    Classifieds
    0

    Re: Cast iron cleaning

    I make a slurry with WD-40 and Barkeepers Friend and apply using scouring pad. Cleanup with mineral spirits.
    Always be yourself because the people that matter don't mind, and the ones who mind, don't matter.

  6. The following 2 users say Thank You to Joe Scharle :


  7. #4
    Senior User
    Nickname
    Jeff
    Join Date
    Mar 2008
    Location
    Rougemont, NC
    Posts
    7,003
    Visit Freq
    6.92 visits/week
    Threads
    609
    Classifieds
    0

    Re: Cast iron cleaning

    Quote Originally Posted by Joe Scharle View Post
    I make a slurry with WD-40 and Barkeepers Friend and apply using scouring pad. Cleanup with mineral spirits.
    Interesting concoction. Do you use the powder or the semi-liquid cream? It's less abrasive than Comet and Ajax and the primary active ingredient is oxalic acid. What the...?

    https://web.archive.org/web/20101014.../435939-1.html

    https://www.barkeepersfriend.com/abo...y-data-sheets/
    Last edited by Jeff; 07-10-2018 at 08:41 AM.

  8. The following 2 users say Thank You to Jeff :


  9. #5
    Staff Advisor
    Corporate Member
    DQ
    Joe Scharle's Avatar
    Nickname
    Joe (75)
    Join Date
    Sep 2005
    Location
    New Bern, NC
    Posts
    5,527
    Visit Freq
    6.19 visits/week
    Threads
    685
    Classifieds
    0

    Re: Cast iron cleaning

    I use the regular dry. We have used it for stainless for decades.
    Always be yourself because the people that matter don't mind, and the ones who mind, don't matter.

  10. The following 4 users say Thank You to Joe Scharle :


  11. #6
    Corporate Member
    DQ
    Gofor's Avatar
    Nickname
    Mark
    Join Date
    Mar 2006
    Location
    Goldsboro, NC
    Posts
    3,146
    Visit Freq
    6.62 visits/week
    Threads
    78
    Classifieds
    0

    Re: Cast iron cleaning

    Quote Originally Posted by Joe Scharle View Post
    I make a slurry with WD-40 and Barkeepers Friend and apply using scouring pad. Cleanup with mineral spirits.
    If you have a hook & loop pad on your ROS, the green abrasive pads will stick to it well enough to put some mechanical action to the above method. I have just been using WD, but add the Barkeeps friend next time it needs a major workover. Thanks
    Practicing at practical woodworking

  12. The following user says Thank You to Gofor for this useful post:


  13. #7
    User
    DQ
    petebucy4638's Avatar
    Nickname
    Pete
    Join Date
    Dec 2009
    Location
    Denver, NC
    Posts
    464
    Visit Freq
    1.35 visits/week
    Threads
    34
    Classifieds
    1

    Re: Cast iron cleaning

    I have had great luck restoring cast iron tool tops with a random orbit sander. The starting grit depends a lot on the condition of the top. The grit that you finish up with depends on how shiny you want the finished surface to be. I like to finish up with 400 grit, but I have gone as high as 1200 grit. If the rusted areas include a lot of pitting, you would probably want to use something like Evapo-Rust to get into those spots that the sander will not reach. When done sanding, I like to wipe the top down with mineral spirits on a terrycloth or microfiber rag to get rid of any sanding residue, then after the top dries, I spray it down with BoeShield. A lot of woodworkers prefer paste wax to BoeShield because the paste wax does appear to develop a more slick surface.

    Pete

    Quote Originally Posted by tdukes View Post
    Hello,

    I'm sure some, if not most, have done this before so maybe it will help someone that hasn't.

    It has been a while since I cleaned and polished my table saw's cast iron top. Glue, sweat, humidity really takes it's toll.

    Got out my ROS sander with 320 grit and WD-40 and went to work. Probably should have started with 220 grit, then 320.

    Cleaned the top with mineral spirits after the sanding and applied a coat of paste wax. Have to say, it has never been this slick when it was new.
    Pete - KD4CQZ

  14. The following 2 users say Thank You to petebucy4638 :


Similar Threads

  1. Cast Iron Extension Table
    By JCraig in forum Where Can I Find, Buy or Sell
    Replies: 12
    Last Post: 01-08-2012, 02:02 PM
  2. Cast Iron Table
    By jhreed in forum General Woodworking
    Replies: 3
    Last Post: 05-15-2009, 06:49 PM
  3. Cleaning "Experienced" Cast Iron
    By Bigdog72 in forum Power Tools and Their Use
    Replies: 8
    Last Post: 10-16-2008, 07:02 AM
  4. Casters & Cast Iron
    By WoodWrangler in forum General Woodworking
    Replies: 18
    Last Post: 09-29-2008, 03:54 PM
  5. What do you use on cast iron...
    By pslamp32 in forum General Woodworking
    Replies: 7
    Last Post: 03-21-2007, 08:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •