I had a piece of teflon sheet left over frrom another project. It has adhesive on one side, and I ordered the sheets from McMasterCarr.
I use a Veritas marking and mortise gauge, but I always have issues with the brass "sticking" (not sliding smoothly) on the wood. It is probably my poor technique, but I stuck some of the teflon to the contact portion of the marking gauges, and it slides slick as butter now.
I use a Veritas marking and mortise gauge, but I always have issues with the brass "sticking" (not sliding smoothly) on the wood. It is probably my poor technique, but I stuck some of the teflon to the contact portion of the marking gauges, and it slides slick as butter now.