Rigid OSS

Status
Not open for further replies.

Keye

Keye
Corporate Member
Looked at the specs online but could not find the length of the spidale or the lenght of travel.

Help.
 

Canuck

Wayne
Corporate Member
Keye,

I have one of those units. The spindle length is 4 1/2" and the oscillating spindle/belt stroke is 3/4"@ 60 strokes/min.. (It comes with a 1/2", 3/4", 1", 1 1/2" and 2" spindles and a 4"x24" belt.)

It's a great little sander and gets used a lot around my place.:wsmile:

Wayne
 

woodrat

New User
Archie
I, too, have one and like it very much. :mrgreen:

Be aware that the foot print is roughly 20 x 17. So it's not a real small unit.
Conversion from belt to spindle sanding is a breeze. It has on board storage
for all the components. It has a built in dust port, but the dust collection is
not all that great, not bad, but could be a lot better. :dontknow:

Hope this helps with your decision.

Thanks,
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top