Octagon Calculator

[Scott Marshburn]

Yesterday I was working on a project in ecabinets and I needed a formula that would give me the measurements that I needed to lay out an octagon. So I made a calculator in excel to help.
Here is the link for the video. Check it out and let me know what you think.

http://youtu.be/OAafQ_O28hk

 

[Skymaster]

Yesterday I was working on a project in ecabinets and I needed a formula that would give me the measurements that I needed to lay out an octagon. So I made a calculator in excel to help.
Here is the link for the video. Check it out and let me know what you think.

http://youtu.be/OAafQ_O28hk

Hope you have better luck than I do with Ecabs :} my issue is I dont use it enuf to get proficient, Blasted program has a wicked learning curve for an "ez" program

 

[Scott Marshburn]

Hope you have better luck than I do with Ecabs :} my issue is I dont use it enuf to get proficient, Blasted program has a wicked learning curve for an "ez" program

I have been using eCabinets fulltime since 2011 and experimented with it off and on a couple of years before that. I have had great luck with it. As you said it does have a learning curve but once you get the basic concept down it is a really versatile program.

They do have online training videos that you can sign up for that are very affordable and will help get you up and running.
http://www.ecabinetsystems.com/ecabinet_systems_online_training.htm

The forums are good place to ask questions also.
http://www.thermwood.com/forums/

And there is always my channel. https://www.youtube.com/user/ecabinetstips
If you have any thing that you need help with shoot me a line and I will do my best to help.