No name Dust collector (220v) SOLD

Southern_Canuk

New User
James
**Sold**

Figured might as well throw this up too, a dust collector I purchased but never used. It's a rated at 18.2amp at 220v so that put it around 5.2hp if my math is correct, it's way overkill for my little shop setup and I'll be going smaller. Impeller size is 12" and it's missing the upper dust filter bag.
There is no Brand name on the tag, previous owner only used it once before I purchased it.

Asking $150
Location: Knightdale
 

Attachments

  • 129201477_222715089209737_2331928484154495684_o.jpg
    129201477_222715089209737_2331928484154495684_o.jpg
    116.4 KB · Views: 181
  • 129202466_222715102543069_7696140406007830108_o.jpg
    129202466_222715102543069_7696140406007830108_o.jpg
    132.5 KB · Views: 174
Last edited:

McRabbet

Rob
Corporate Member
My ClearVue CV1800 with its 5 HP Leeson motor draws 21 Amps at full load and spins a 15" solid steel impeller. I doubt your motor is more than 3 HP.
 

Southern_Canuk

New User
James
My ClearVue CV1800 with its 5 HP Leeson motor draws 21 Amps at full load and spins a 15" solid steel impeller. I doubt your motor is more than 3 HP.
I do not know the draw when it's running, I'm basing it off of the rating on the motor tag so there could be a chance, sadly I don't know much more about it but figured it could be useful to someone.
 

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top