One too many rainy days plus a "few" thin/bare spots on the tent roof and I decided it was time to invest in a more durable/permanent workshop. I found a repo'd 10x20 A-frame shed with a 6' door on one end. There is a small window on the other end, but I would like to add a second 6' door to replace that window. I am also considering putting in a standard 30-36" door in the center of the long front side along with 2 windows.
I have a band saw which I was given but never used, a compound miter saw, a router table, a portable air compressor and would like to get a table saw and maybe a dust collection system in the future. So with all that said, I need ideas on how to set it up. I do plan to run electrical to the building and am hoping I can run the lights, air compressor and vacuum at the same time without tripping the breaker. Also thinking about at least 1 - 220 line for future whatevers.
I have a band saw which I was given but never used, a compound miter saw, a router table, a portable air compressor and would like to get a table saw and maybe a dust collection system in the future. So with all that said, I need ideas on how to set it up. I do plan to run electrical to the building and am hoping I can run the lights, air compressor and vacuum at the same time without tripping the breaker. Also thinking about at least 1 - 220 line for future whatevers.