need 4'x4' or 4'x8' CNC cutting - Raleigh-Durham area

[Eric_in_Pittsboro]

I have a one-off project that might happen soon, and would need to get parts cut from 3/4 inch plywood.
I have the CAD done, and I think that all the pieces would come out of a single 4x8 sheet.
I'm near Pittsboro, so Raleigh, Durham, Chapel Hill, Burlington, Sanford are closest.

Any recommendations for a small shop or experienced person who could do this?

-Eric

 

[chris_goris]

I have a one-off project that might happen soon, and would need to get parts cut from 3/4 inch plywood.
I have the CAD done, and I think that all the pieces would come out of a single 4x8 sheet.
I'm near Pittsboro, so Raleigh, Durham, Chapel Hill, Burlington, Sanford are closest.

Any recommendations for a small shop or experienced person who could do this?

-Eric

I can do it, but in Lexington.

 

[NCTurner]

You might want to check with Michael Mathews pretty sure this is his wheelhouse.

 

[kserdar]

My CNC is only 4'x4' and I believe Michael's is smaller yet ...

 

[Eric_in_Pittsboro]

I can do it, but in Lexington.

Thanks Chris! Lexington is do-able. Let me see how things shake out...

 

[Eric_in_Pittsboro]

I'm still looking, and needing to get it done next week. Cut either from two 4x4 pieces, or a single 4x8.

@chris_goris - you are my backup plan, just kind of far away. I can't send you a direct message from here; could you send one to me?

 

[SJWiehe]

I’m in North Raleigh and have a 4x8 cnc. Message me and we can connect and see if I can be of help.

 

[mdbuntyn]

@SJWiehe You'll have to message @Eric_in_Pittsboro since he's still a New User

 

[SJWiehe]

Thank you for reminding me. Done.

Steve

 

[Stuart Kent]

We can do it if you still need help. I am available M - W next week. Feel free to call.

252.916.8226

 

[chris_goris]

Took care of this some time ago. Thanks all