Delta SQUAWKING ?

Status
Not open for further replies.

Dreuxgrad

Ed
Senior User
Finally got some help hanging my Delta 50-875 air cleaner and now it is not working.
Making a sound like it doesn't like something (warning signal?)so it is getting power.
It is not level. No note in instructions as to this issue.
Removed filters and washed the initail and shook out the cloth filtration.
Nothing in the instructions in regards to what signal means , nor do the parts have the 5A fuse/cb listed.
Delta Tech Services closed on Columbus Day.
Suggestions or experiences??
Thanks, Ed
 

red

Papa Red
Red
Senior User
Just by chance is the fan hitting something preventing it from spinning? That's all I can think of unless something got fried. Good luck.

Red
 

Dreuxgrad

Ed
Senior User
nope, the fan spins freely. Don't want to bust it apart, so let's see what Mr D has to say when they return to work tomorrow.
And I added some chain links so that it is almost level now.
Still has the same alarm sound, so it has to be electronic or electrical.
 

bowman

Board of Directors, Webmaster
Neal
Staff member
Corporate Member
Is it wired for 220V and connected with 120V?
 

Dreuxgrad

Ed
Senior User
Nope, not it either as it worked fine in Durham.
Mr Delta tech offered no worthwhile advice.
Next step=break it down and hot wire it.
Thanks for helping, Ed
 

Dreuxgrad

Ed
Senior User
Done, temporary wiring completed = works at one speed only, but it blows air and the inline switch is
reachable without any supplementary assistance.
Now to join Makerspace, and see if the board can be fixed for less than a replacement one of $150.
Ed
 
Status
Not open for further replies.

Premier Sponsor

Our Sponsors

Top