I have a large vacuum pump that needs a new home. It is 10HP , 3 Phase 220v. can be used on a CNC vac table. I would use it but I dont have 3 Phase power :-(
yea im aware, too much for too little gain.You could just use it with a VFD and transformer. Similar to this guy, but not as messy, Cost would be 5-800 bucks to do it.
10 hp converter single to 3-phase
I dont really need it. my table has 8 dedicated zones but I can typically just screw something down to the spoilboard and run it without running an additional machine.Build yourself a 3phase converter with an idler motor. I run my 15 hp vacuum pump off of one and it works great. You can build the converter cheaper than a new vacuum pump.