Been a while since I posted around these parts. I've been spending my time working on the cabinets for our kitchen remodel and figured I'd post some pics of the work in progress. There's a total of 34 cabinets going in and I have all the components made for them except for the wall oven cabinet and fridge enclosure. Due to storage space constraints I'll be assembling them as I need them for installation. I have a delivery of maple scheduled on Wednesday from The Hardwood Store so I can start milling the face frames. I'll try to keep this thread up to date as I progress.
This first pic is the mock-up of the wall cabinets for the hutch area. The bridge cabinet in the middle is going to house some electronics (modem, wifi router, Apple TV) so I added some vents to help dissipate the heat, the doors on that cabinet will be covered in speaker cloth and the TV is going underneath it. There is another 18" cabinet going on the right side, just ran out of room on the work table. This is a 9' run that is going on a currently blank wall so it means lots of new storage.
This first pic is the mock-up of the wall cabinets for the hutch area. The bridge cabinet in the middle is going to house some electronics (modem, wifi router, Apple TV) so I added some vents to help dissipate the heat, the doors on that cabinet will be covered in speaker cloth and the TV is going underneath it. There is another 18" cabinet going on the right side, just ran out of room on the work table. This is a 9' run that is going on a currently blank wall so it means lots of new storage.