We have a glass table with a segmented, I guess you'd call it that, glass pedestal/base. The short version is that the adhesive between 2 of the segments gave out while picking it up to move it. I'm looking for a way to "glue" the pedestal back together. It actually appears that it's not held together by glue at all. There is a 2" circle of what appears to be some type of double sided tape or film that holds the segments/layers together. I'm wondering if CA applied to the circle might bond it back together. I've looked for adhesives online and essentially found "glass glue" which from the reviews seems to be nothing other than CA glue re-labeled. I found some adhesive tapes, but no circles, which might do the job. The adhesive could be any shape I would guess, but wondering if a square might be noticeable. I could always try to make a circle....
Anyway, I'm open for suggestions from folks who might have some experience or suggestions on how to get this back together to please LOML.
Here's some pictures to make it a little clearer, tough to get good ones though.
Thanks,
B.
Anyway, I'm open for suggestions from folks who might have some experience or suggestions on how to get this back together to please LOML.
Here's some pictures to make it a little clearer, tough to get good ones though.
Thanks,
B.