vise

  1. IMG_01212

    IMG_01212

  2. benchcrafted

    benchcrafted

  3. benchcrafted

    benchcrafted

  4. benchcrafted

    benchcrafted

  5. benchcrafted

    benchcrafted

    No I did not shrink my tape measure :).
  6. benchcrafted

    benchcrafted

  7. kooshball

    What's your vise? A question (or two) about bench vises...

    I took a 3-week pause this winter at the expense of my walnut dresser project to reside my garage and replace all the windows and doors while the house was stripped to its frame. During this time I kept thinking to myself, "boy I wish I had a real woodworking bench for all those drawers that I...
  8. kooshball

    Veritas 24" twin screw vise vs. dead man??

    Ok, I know some of you have the Veritas 24" twin screw vise; so is the assumption true that unless you are trying to support an entire tree that a dead-man becomes unnecessary? I know the official answer is "it depends" but give me some context as to what you have successfully secured vs...
  9. eyekode

    Make a vise out of a ball screw?

    I was wondering if anyone has ever made a wagon wheel vise or similar out of a ball screw? They could definitely take the load but can they take the dusty environment? Just wondering because I came across these: http://www.sciplus.com/category.cfm/subsection/19 18" long, 1x4TPI ball screws for...
  10. Gotcha6

    WWer's bench w/ vise $179

    Not mine. Wish it was..... http://charlotte.craigslist.org/tls/2059423183.html
  11. Mike Davis

    Fine wood vise

    http://greensboro.craigslist.org/tls/1926934827.html not mine :wink_smil
  12. NCTurner

    Jorgensen? Bench Vise Apex $50.00

    Woodworker's Vice - $50 (Apex) http://raleigh.craigslist.org/tls/1917584857.html Date: 2010-08-24, 9:38PM EDT Reply to: sale-pgm6s-1917584857@craigslist.org [Errors when replying to ads?] This vice is brand new! It has a 10 inch throat and mounts underneath your workbench top. Please...
  13. eyekode

    Wood screws: Moxon double screw vise and thread for leg vise

    Thanks to Tom (toolferone) I got the chance to use a Beall wood threading kit like this one: http://www.bealltool.com/products/threading/bigthreader.php Pretty cool kit. Especially the tap that has a guide in front of the threads to make sure you are taping in line with your pilot hole. First...
  14. CatButler

    Too much play in vise screw

    I attempted to make a twin screw vice (not synchronized like lee valley) using a couple of vise screws, but the outer face has too much play and doesn't hold boards that aren't very deep well. One thing I did wrong was I didn't taper the the outer face. I have now fixed that, but I would still...
  15. CarvedTones

    My budget bench vise is finally useful!

    I have one of those handyman/carpenter vises that clamps on to a table or workbench. I have never found it all that useful because the clamp is not that great and it is often in the way on the top and can't be used like a bench vise. Here is a shot of it now: Thats from under my "bench"...
  16. bluthart

    Bench Progress - Vise Installed

    Here is the Rockler 9" quick release vise I installed Monday. I set up a jig so I could router the recess easily. I then attached the vise, and cut and installed the jaws... With the jaws... just need to add tung oil.
  17. A

    Bench vise jaw - a dog question?

    As long as I'm asking bench questions- I will be using Lee Valley round dogs (and the shorter pups) on my bench. Unlike the top, the vise jaws and aprons are thicker than the length of the dogs/pups. Which kind of dog hole do you prefer in the vise jaw: Blind, limited-depth holes. Dog/pup...
  18. LeftyTom

    Char CL: Wilton Vise $25

    In Monroe http://charlotte.craigslist.org/tls/1303791614.html Not mine, no one I know.
  19. A

    New bench vise- Wow!!!!!

    For anyone thinking about a bench vise- check out the Glide Vise- be sure to watch the video! If the price of their tail vise is any indicator, it will not be cheap!!
  20. ScottM

    Looking for 9" WW vise

    I need to break down and get a 9" WW vise. This will be going on the front of a work bench. Any recommendations on one that won't break the bank. I would consider a good used one if someone has one for sale or trade. Thanks.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top