veneer

  1. BrianInChatham

    Wow that's a lot of veneer...

    Any one of these lots is more veneer than most of us could use in a lifetime, but maybe someone will be interested anyway. http://www.irsauctions.com/index_lots.asp?pg=details&id=13813
  2. pslamp32

    Some more veneer questions...

    Just a couple of general questions for you gurus. What is your favorite substrate and substrate source? When doing tabletops etc. at 1.5" or more do you just glue up several 75" boards? What works better for this MDF or ply? Do you generally use some hardwood for edge work or glue some of...
  3. pslamp32

    Veneer?

    Any veneer gurus on here that can recommend a good site for veneer? I know about Joe Woodworker, just wanted to comparison shop a bit. Looking primarily for larger 'exotic' sheets for use with tabletops etc. Warning...answering this query will most likely subject you to a barrage of veneering...
  4. veneered_drwrs_3

    veneered_drwrs_3

    • danmart77
    • Media item
    • drawer fronts on veneer
    • Comments: 1
    • Album: Penn Desk and Bookcase
  5. DSC06885

    DSC06885

    crotch cut veneer
    • danmart77
    • Media item
    • drawer for fronts veneer
    • Comments: 0
    • Album: Veneer Work
  6. DSC06885

    DSC06885

    crotch cut veneer
    • danmart77
    • Media item
    • drawer for fronts veneer
    • Comments: 0
    • Album: Veneer Work
  7. Mr. Lahey

    Plywood with Cherry Veneer?

    Anyone know where to get it locally?
  8. Mark Gottesman

    Need advice on using CA glue and Veneer on a Banjo

    Well, I am doing something very new to me. I have a banjo neck where I have pulled the frets. I want to glue cherry veneer into the slots using CA glue. I have little experience with this stuff outside of some Crazy Glue repairs. I have a bottle of Medium viscosity CA from Woodworkers and...
  9. JRD

    Veneer Tips?

    While committed to the "Dark Side", every now and then I try to learn something new. I'm trying to master veneer application and am looking for any good tips. The veneer I have is not perfectly flat, in that it has quite a few ripples and refuses to lay flat to the board I want to apply it to...
  10. Travis Porter

    Cherry and maple veneer for sale

    Cherry veeners are 50 cents a square foot off the top of the stack. Complete flitches (20 to 30 sheets at 9 ft long) discounted. Premade sheets of cheery veener 2 ft by 4 ft up to 3 ft by 6 ft $1 a square foot. Maple veneers up to 9 ft long. 25 cents a square foot No shipping...
  11. Touchwood

    Veneer anyone??

    Hi all, There was once a time when I thought veneering would be a really neat thing to learn. I was doing a lot of little fancy boxes and the idea of putting exotic wood veneers on panels for lids and things sounded great. I bought a bunch of pieces but never got around to using them. I think...
  12. veneer

    veneer

    pictures of veneer
    • Touchwood
    • Media item
    • store veneer woodworkers
    • Comments: 0
    • Category: Furniture Projects
  13. veneer

    veneer

    pictures of veneer
    • Touchwood
    • Media item
    • store veneer woodworkers
    • Comments: 0
    • Category: Furniture Projects
  14. veneer

    veneer

    pictures of veneer
    • Touchwood
    • Media item
    • store veneer woodworkers
    • Comments: 0
    • Category: Furniture Projects
  15. russellellis

    Looking for zebrawood veneer

    Hey guys, Im looking for some zebrawood veneer. Ive done way too many google searches and have come up the good, the bad and the ugly. So.....where would you guys get zebrawood veneer if you needed it. Im getting ready to start a jewelry armoire out of zebrawood and walnut. The cost and...
  16. Monty

    How should I tack this veneer back down?

    Approximately 50 year-old piece... refinishing... card scraper... should have zigged when I zagged... yea, I know better. :eusa_doh: I'm thinking hide glue? I don't have any experience with the stuff. Any advice appreciated.
  17. W

    I need some RO Veneer

    I'm looking for some Red Oak Veneer for a project that I'm doing.I have to match an existing kitchen that has RO over MDF doors with an edge profile.I only need a piece or combo of pieces that are 10" wide by 48" long.The 10" width is the minimum but the length can be as short as 16" pieces.I'm...
  18. crokett

    Cutting Veneer

    I had an idea for a Christmas present for my wife last year. I took headshots of the kids and the plan was to make marquetry versions of the shadow portraits we did with construction paper in kindergarten. I have oak for the background and walnut for the 'shadow'. It didn't get done so I...
  19. Walnut Arts & Crafts Dresser - Overall View

    Walnut Arts & Crafts Dresser - Overall View

    Overall view of the dresser taken at the Mountain State Fair in 2003. Blue ribbon in furniture division, judges choice award and overall Best of Show blue ribbon for crafts division.
    • Ozzie-x
    • Media item
    • & arts bookmatch burl crafts dovetails dresser mission veneer walnut
    • Comments: 0
    • Album: Furniture, Projects & Woodworking
  20. Walnut Arts & Crafts Dresser - End View

    Walnut Arts & Crafts Dresser - End View

    Another end view showing the walnut burl bookmatches, through mortise & tennons with ebony pyramid pegs, handcut dovetails, relieved edges on top with sub-frame support.
    • Ozzie-x
    • Media item
    • & arts bookmatch burl crafts dovetails dresser mission veneer walnut
    • Comments: 0
    • Album: Furniture, Projects & Woodworking

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top