turkey

  1. Artisan Pirate

    Simple Segmented Thanksgiving Turkey, Scroll Saw Project Video

    Hey Everyone! In this fun and festive scroll saw project video, we make a cute little Segmented Thanksgiving Turkey to hang on a door! I cut the design from 3/4 inch pine and the pattern comes from and older issue (Fall 2021 Issue 84) of Scroll Saw & Woodworking Crafts Magazine. I think this...
  2. golfdad

    Turkey Day

    Hope everyone has a safe and great Thanksgiving....we all have many blessings:eusa_clap
  3. L

    Turkey napkin holder

    Made this for Thanksgiving, got the wood from The Woodworking Source in Mooresville, NC (first visit, really nice guy, let me dig through his scrap pile and even planed a few pieces). Sapele, maple, and either ash or oak (not sure which). Cutting to fit is hard! When I got it fitted as best I...
  4. Turkey_napkin_holder_2

    Turkey_napkin_holder_2

  5. Turkey napkin holder

    Turkey napkin holder

  6. jcz

    turkey calls

    I promised some pics for you guys and here they are. These are the calls I was able to get done in the last 2 weeks. I have 7 more that are done I just need to make up the strikers to go with them. Thanks for looking. View image in gallery View image in gallery View image in gallery...
  7. Picture_0741

    Picture_0741

  8. turkey calls

    turkey calls

    cocobola, hedge, teak, cocobola,cocobola, teak
  9. Picture_0781

    Picture_0781

    turkey calls
  10. flyrod444

    A few call for this springs turkey season.

    Being that turkey season is just around the corner I have been working mostly on call as of late. I do have a couple bowls that I work on in between calls that I hope to finsih up by the weekend, but until then here are a few that I finished up today. Thanks for looking, Jack This one is a...
  11. flyrod444

    A few Turkey calls

    Here are a few turkey calls I just finished. They all have ceramic surface. Jack
  12. Truefire

    Any of you guys turn turkey pot calls? supply inquiry

    Hey guys, any of you hanging out here in the woodturner's forum section, turn turkey pot calls? I am looking for some wooden soundboards and was wondering if you had any good sources or if any of you produce your own? I understand the simplicity in producing one's own, however sometimes going...
  13. flyrod444

    A couple of flawed turkey calls.

    Here are a couple pots that had a flaw in the wood, so I didn't sell them. The pot on the left is dogwood and it had a crack at the rim that I had to fill to save it. The crack was caused by what apears to be a 22 bullet that I didn't know to be in the wood until I mounted the blank and turned...
  14. flyrod444

    A flock of turkey Calls.

    I turn mostly bowls on my lathe, but spring always gets me in the call making mood. This is a call I just made using some turkey tracks inlay one of our members made. He makes inlay and came up with this for turkey call makers. It will be great for box calls as well. The other calls are made of...
  15. flyrod444

    Turkey tracks call

    Matt Furjanic from this site made the inlay for this call. I have one more piece to try, I hope to do his work justice. This just has the first coat of finish on it. It should shane up very nice with 4 or 5 more coats on it. Jack imageimage
  16. M

    Inlay Banding for Turkey Calls

    I know there is a lot of interest in making wood turkey calls for the wild turkey hunter. I have several friends doing this, and they have been after me to make an inlay with a turkey track in it. After several attempts, here is what I came up with... The primary wood is mahogany with ebony...
  17. PChristy

    A framed Turkey(update-added pics)

    Here is the turkey I finished cutting a few weeks back - sorry about the pictures - I am wishing for a camera this Christmas:eusa_pray View image in gallery View image in gallery Any comments - critics are welcomed:gar-Bi
  18. Larry Rose

    Turkey Table?

    I saw Norm build a Turkry table a couple of weeks ago and decided to give it a go. This is my version of it. It's reclaimed pine with a Poly finish. And no, I don't know where the name comes from. :dontknow:
  19. flyrod444

    turkey calls

    Here are a few more pots I just completed. This time of year tends to see me making more calls than bowls. They help me buy toy's to turn bowls. Jack This one is slate over glass in a spalted birch pot. This one is slate over glass in a curly maple pot This one is glass over glass in a...
  20. Threejs

    Turkey Call

    First, I have to thank Flyrod444 for his help on this. He answered several questions, and got me going in the right direction. This is another Christmas present for this year. It is a turkey call made from cherry and slate. The striker is purple heart and cherry. I was surprised at how...

Premier Sponsor

Our Sponsors

Top