train
-
Custom Scroll Saw Name Trains
2 Custom Scroll Saw Name Trains The names are "Johnny" and "Nyle" two awesome little dudes that visit us at @themebanetraindisplay every time we're open! The design for the name trains is designed by Steve Good and I laser cut a full set of the letters out of poster board in my...- Artisan Pirate
- Thread
- artisan pirate custom follow locomotive scroll saw subscribe train youtuber
- Replies: 0
- Forum: Scrollsaw Work
-
Simple Train Christmas Ornaments
Simple Steam Train Ornaments. The design comes from Holiday Scroll Saw Ornaments by @foxchapelpublishing I stack cut 2 out of 1/4 inch material on my @deltamachinery Scroll Saw with number 5 ultra reverse tooth blades. I then sanded with 180 grit @klingsporswoodworkingshop sandpaper Before...- Artisan Pirate
- Thread
- artisan pirate diy follow handmade merry christmas ornament scroll saw subscribe train youtuber
- Replies: 2
- Forum: Scrollsaw Work
-
Union Pacific Train Portrait
Union Pacific Train Portrait Steve Good design is cut from 1/4 inch plywood with 1/4 inch backer board. The frame is made from a ripped down 2x4 . ...- Artisan Pirate
- Thread
- artisan pirate follow handmade locomotive scroll saw subscribe train youtuber
- Replies: 0
- Forum: Scrollsaw Work
-
Table For My Model Train Room
Finally, after a long time, my permanent table in the Train Room is up! Way bigger than the other temporary table and room to expand! I built it taller than the old table so it has ample storage underneath. The table measures 7 foot 5 inches long by 4 foot wide and all of the material was picked...- Artisan Pirate
- Thread
- artisan pirate follow handmade man cave model train subscribe train youtuber
- Replies: 3
- Forum: General Woodworking
-
1959 Era Diesel Locomotive Portrait
1959 Era American Diesel Locomotive Portrait The design is from Scroll Saw By Land Sea And Air By...- Artisan Pirate
- Thread
- artisan pirate follow fox chapel locomotive scroll saw subscribe train trains youtuber
- Replies: 0
- Forum: Scrollsaw Work
-
Animal Cracker Train, Scroll Saw Project Video
For those who use the instagram platform, I would like to inform you all that my original account artisanpirate was compromised and hacked, I cannot log in to it anymore and i've been forced to make a new on artisan.pirate and I hope the over 3000 followers I gathered their will refollow me, its...- Artisan Pirate
- Thread
- artisan pirate follow scroll saw subscribe train trains youtuber
- Replies: 0
- Forum: Scrollsaw Work
-
I Still Play With Trains, Scroll Saw Work
"I Still Play With Trains" Scroll Saw Piece Steve Good design uses 3/4 inch Blue Pine. An older video of mine if you wanna see it https://youtu.be/lWr0kkEjZqM And yes, I still love running my trains in the train room! . ...- Artisan Pirate
- Thread
- artisan pirate follow handmade locomotive scroll saw steve good subscribe train youtuber
- Replies: 0
- Forum: Scrollsaw Work
-
Express Train, Train show today! :)
Express Train Coming Through! Design is from Etsy and the scroll work is 1/4 inch material and the backer board is 3/4 inch plywood. Fitting I should post this today because there is a train show today at the @themebanetraindisplay ! I'll be on hand for the morning shift at todays train show...- Artisan Pirate
- Thread
- artisan pirate locomotive scroll saw steam train trains
- Replies: 1
- Forum: Scrollsaw Work
-
All Aboard! Steam Train Project Video
Hey Everyone! In this scroll saw project video we make this nice little Steam Train with the Iconic 'All Aboard" quote underneath! This Steve Good design uses 1/4 inch material layerd together to make a neat 3d effect. This Train would be a perfect gift to make for the Rail Fan in you like young...- Artisan Pirate
- Thread
- artisan pirate diy follow fyp handmade scroll saw steve good subscribe train woodworking
- Replies: 0
- Forum: Scrollsaw Work
-
Small Name Train (Kenneth)
Kenneth Small Name Train Made for my friend Kenneth who is one of the original and founding members of the @themebanetraindisplay . Kenneth is in his 80s and is very knowledgeable about model trains and has a beautiful home layout in his basement. I cut this name train out of 3/8 inch material...- Artisan Pirate
- Thread
- artisan pirate diy follow handmade home decor locomotive name steve good subscribe train
- Replies: 3
- Forum: Scrollsaw Work
-
I Still Play With Trains Piece
I Still Play With Trains Scroll Saw Project Steve Good design uses 1/4 inch plywood for the scroll work and 1/2 inch plywood for the backer boards, everything was cut with number 5 ultra reverse tooth scroll saw blades. And yes, at 34, I still play with trains! :) #ArtisanPirate- Artisan Pirate
- Thread
- artisan pirate diy follow fyp scroll saw steve good subscribe train trains woodwork
- Replies: 1
- Forum: Scrollsaw Work
-
Woodwork In My model Train Room
It's Train Stuff Mates, You Wouldn't Understand LOL, This is on the mantel in my model train room All the woodwork is by me, even the rustic pallet wall! 2 of the scroll saw portraits are Steve Good designs and the first portrait and the train clock design is from Scroll Saw Village The bottom...- Artisan Pirate
- Thread
- artisan pirate diy follow handmade locomotive mancave steve good subscribe train woodwork
- Replies: 6
- Forum: Scrollsaw Work
Premier Sponsor
Our Sponsors
LATEST FOR SALE LISTINGS
-
SOLD -- $75: Gast moa v113 Vacuum Pump Veneer, 60" bag and board- Started by peterdnight
- Replies: 1
-
GONE: Gladiator 5 cleats, 10 hangers, Paper Towel and Shelf
- Started by peterdnight
- Replies: 3
-
SOLD -- $100 Makita mac700 portable air + grex pin nailer + 2 others + 50' hose
- Started by peterdnight
- Replies: 1
-
-
