stick

  1. U

    Sealing crepe myrtle balusters?

    I ended up with about 60 crepe myrtle branches at least 1" or thicker in diameter, and because I had to remodel my front porch anyway I thought I'd use them for the balusters. I started stripping the bark off the first few with a shave horse and draw knife because I wanted to use a clear coat of...
    • uptop
    • Thread
    • branch crepe exterior porch or deck stick
    • Replies: 1
    • Forum: Finishing
  2. CarvedTones

    Any stick carvers looking for stock?

    I have to cut down an arborvitae that has just gotten out of hand next to my house. It has several trunks that are about 3" or so in diameter and over 10' long. The wood looks like ERC; it would make really nice sticks. I am tempted to bundle it up (you want to do that to keep them straight)...
    • CarvedTones
    • Thread
    • carvers stick stock
    • Replies: 0
    • Forum: Wood
  3. LeftyTom

    Stick Welder Recommendations

    Any suggestions/comments about my buying a 120v stick welder, which will have an output of under 100 amps? My first project will be welding some rebar that I fashion into a trellis for a rose bush. The design has me welding circles of rebar to stiffen the trellis uprights. Sears, Lowes, Home...
  4. D

    Metal or Stick

    I am looking into building a new shop on my property. What do you recommend as far as a metal building vs a traditional stick building? Any recommendation on size or type of building? I know bigger is better and I do have 5 acres but want to watch my budget as I still need to buy a good...
  5. J

    1/2" type L copper pipe $5 a stick

    Was in the Habitat ReUse Store in Raleigh today, and they had a cart with mostly 1/2" type L copper for $5 a piece, and some 3/4" for $9. The sticks were a little less than full ten feet in length (8 1/2 - 9+ feet). Lowes sells 10' sticks for $15.35 plus tax. Only ten pieces went home with me...
  6. wdkits1

    Bandsaw Walking Stick

    LOML wanted me to make her a new walking stick. Had to be a minimum of 44” long but my lathe can only take stock 40” plus she wanted it made from a couple of different woods and it had to taper from 1 1/4”- 1”. Using what I had learned from making my pen blank jig I went ahead and made a new...
  7. Mark Stewart

    stick pen

    Hi here I just wanted to share with you guys. Ive been playing with these for a few weeks now this is the first one I got to finish all the way (cracks breakage ect) total cost package of 10 bic pens .50 fleemarket, stick of bw from my buddies cutoff ben 1.5x1.5 0.00 some sand paper from...
  8. Mark Stewart

    has anyone ever made stick pens

    I read an article about this some where a while back and it seems like fun. I tried a few slimline pens, not my thing. Just wondering what sise drill bits to use and that kind of thing. Thanks Mark
  9. Walking Stick

    Walking Stick

    This is a walking stick that I carved for my son the veterinarian. It is dogwood with the carvings stained with Minwax Red Oak.
    • Bugle
    • Media item
    • carving stick walking
    • Comments: 0
    • Category: Member Galleries
  10. NCTurner

    Stick Pens-an alternative to kits.

    http://wnywoodturners.com/articles/stickpen/stickpen.htm
  11. Aisok sticks for Jujutsu class

    Aisok sticks for Jujutsu class

    Sticks made from various woods
    • mbolt512
    • Media item
    • bamboo hickory oak stick walnut
    • Comments: 0
    • Album: Misc Projects
  12. Aisok sticks for Jujutsu class

    Aisok sticks for Jujutsu class

    Bamboo stick with walnut handle
    • mbolt512
    • Media item
    • bamboo hickory oak stick walnut
    • Comments: 0
    • Album: Misc Projects
  13. Aisok sticks for Jujutsu class

    Aisok sticks for Jujutsu class

    Bamboo stick with walnut handle
    • mbolt512
    • Media item
    • bamboo hickory oak stick walnut
    • Comments: 0
    • Album: Misc Projects
  14. Aisok sticks for Jujutsu class

    Aisok sticks for Jujutsu class

    Bamboo stick with walnut handle
    • mbolt512
    • Media item
    • bamboo hickory oak stick walnut
    • Comments: 0
    • Album: Misc Projects
  15. S

    jointer push stick

    .
  16. rcflyer23

    Popsicle Stick Pen

    This is something that I turned tonight. I was walking through Hobby Lobby the other night with the LOML and came across these predyed sticks and had a light bulb go off. I glued them up before dinner. I just poured Thin CA over both sides and hit it will accelerator waited until after dinner...
  17. lottathought

    Stick Em Up

    I made it just under the wire..but I made it. I would have loved to have made the contest but no way I was going to finish in time. Here is what all the kids are getting this year. I tried them all and they all work. Thanks to Fred for pointing out where to get the triggers and plans. And on a...
  18. Canuck

    Cope & Stick - 1ST Attempt

    LOML asked me if I could replace some '70's cabinet doors in the bathroom's with some raised panel doors. Never attempted it so all I need is a couple of new tools.............:lol::lol: Ordered the Cabinet set from MLCS and a coping sled from our friends at Rockler.Com...
  19. gazzer

    What doesn't stick to CA glue

    I am planning on using cyanoacrylate glue to assemble some small thin pieces. I will hold them with finger pressure until the glue sets but I want to make sure that the assembly stays flat and that the pieces are in alignment. To do this I will use a flat surface with a small fence to butt the...
  20. Larry Rose

    Peel and stick veneer

    Has anybody used Rocklers peel and stick veneer? I just bought some and want to use it over a substrate of Birch plywood. The instructions mention sealing the wood first. Are they talking about just porous woods or all woods and will thinned shelac do the trick?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top