station

  1. jlwest

    Charging Station

    Here is my recently completed charging station fro iPods, phones, Blackberry, ect. Walnut and maple. Sorry about the picturs. I'm better at wood that electronics. Jeff
  2. WoodWrangler

    Sharpening Station & Laminate Work

    Most of you followed and many took advantage of the shop cabinet deal in Charlotte a few weeks back. Well, in that deal I picked up a base cabinet for $10 that was just taking up space in my already cramped space. So, I had to do something with it. Not exactly (ok, not even close to) fine...
  3. roweathers

    Opinions on Earlex Spray Station 5000

    I just purchased this HVLP system from Woodcraft in Raleigh. I plan to use for painting/finishing furniture. It is a turbine based system. I would appreciate any opinions (pro or con) and I can take the thing back if necessary. I have a Porter Cable compressor (150 psi, Job Boss) and...
    • roweathers
    • Thread
    • 5000 earlex opinions spray station
    • Replies: 8
    • Forum: Finishing
  4. PeteM

    Queen Ann Sharpening Station

    A co-worker was going to throw this out. It has some paint spatters and the "plastic finish" was :thumbs_do After about an hour of clean up, a little gel stain and a bit of poly . . . :eusa_danc pete
  5. Glennbear

    Weather Station

    Due to unforseen circumstances, this gift is running just a little late :gar-La; 7:50PM on Christmas Eve and all that remains to be done is the wrapping :eusa_danc This weather station I made for my daughter and her hubby contains a thermometer, hygrometer, and barometer, in lieu of the normal...
  6. rywilson

    Plans for a charging station?

    Was wondering if anyone had some plans for a charing station. I'm looking from something to put on the counter to hide to cords for cell phones. Also maybe a drawer to put keys and wallets. I've tried to sketch a few in Sketchup but have not been overly pleased with the results.
  7. TracyP

    Walnut Weather Station Weekend Project

    This has been something that I have wanted for as long as I can remember. My grandparents had one on their wall and it was the thing that I wanted most when they passed away. I was not able to get it and that was OK. So on a trip to The Hardwood Store Of NC last weekend I bought a piece of...
  8. bluthart

    Hello from Iron Station, NC

    I am beginning woodworker and enjoy making Adirondack Furniture as a start. I have been practicing joinery and cabinetmaking lately. If anyone lives nearby I would love to pick up some techniques from experienced craftsman. I am also posting lumber for sale in the classified section. I look...
  9. TracyP

    Weather Station Components

    I placed an order from Klockit for a set of components for a weather station. Thermometer, barometer, and hygrometer only to be called and told they are in the process of changing suppliers and will not have any parts in until the end of May of the middle of June. Well when I decide I want...
  10. Nice Figures

    Iron Station to Coast

    I'd like to get a couple Walnut slabs from Kyle's place near Charlotte to the coast (Salter Path) or close. If anyone is coming this way or could relay at the picnic I'd sure appreciate the help. They'll be about 30" side and maybe 48" tall...Probably to large for a car... Thanks, Paula
  11. NZAPP1

    From miter stand to station

    I have been working on upgrading my mitre saw stand. The slide out will allow for a dust collecting funnel under the bench. I will be working on the draws and doors next.
  12. Jon

    MAJOR miter saw station improvement

    I have been making a miter saw stand/station. here is a before picture. Now here is the new improved version. DW716 for a real steal. I was in Lowes Hardware and they had one marked for 299.00 instead of 399.00 I took it up front and she ran it and it came up 299. Afetr i left...
  13. Jon

    Jet cabinet saw Roter table/Work station FINISHED WITH PICS

    After messing with my new Jet saw I decided the extension table and adjustable legs were not very stable and The table top was held together with tiny brads. So I took it apart and started to build my own router table worksation. I really dont know what to call it. I plan on building a cabinet...
    • Jon
    • Thread
    • cabinet finished jet pics roter station table or work
    • Replies: 17
    • Forum: General Woodworking
  14. T

    Router Station Completed!!! See pics...

    I feel like I het a mile stone completing this project. It only took about 3 months longer than I thought. (Why does that happen everytime.) Anyway many thanks to Monty for letting me use his NYWS plans and the 17/32 and 9/32 bits. He also suggested that I make some adjustable fences that are...
  15. Weather Station

    Weather Station

    1998 Christmas presents.
    • KC7CN
    • Media item
    • fun station stuff weather
    • Comments: 0
    • Album: Fun Stuff
  16. Top Detail

    Top Detail

    • KC7CN
    • Media item
    • fun station stuff weather
    • Comments: 0
    • Album: Fun Stuff
  17. Splinter

    Sanding Station completed

    When I bought the Ridgid Oscillating/Belt Sander I finally had a good excuse to build a sanding station. I took a damaged cabinet that my son got for me at his place of work that was headed for the landfield and cut it down and converted it to a nice sanding station. It already had rollers on...
  18. T

    Miter saw station plans????

    I am in the designing stages for a "back bench" / "miter saw station". I have about 16' of wall space to run the station. I plan to make cabinets to set the station on and wanted to know what was a good width and depth for drawers to accomodate shop storage. I'm guessing that 2' wide and...
  19. Kyle

    Picture of my shop/store in Iron Station

    I put a few of the small slabs outside :) The second picture is a piece of some "purty" Claro Burl.
  20. smessick

    Tool Dock Router Station

    Anybody have any thoughts regarding the Tool Dock Router Station?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top