station

  1. zapdafish

    miter station almost done

    I decided to build a flat station all the way across rather than sink a portion of it for the miter saw to live in. That way I could move it out of the way and use the counter space for other things. It also lets me move the miter saw to the left or right, depending on where I need the support...
  2. Left view

    Left view

    • TracyP
    • Media item
    • in kapex progress station
    • Comments: 0
    • Category: Member Galleries
  3. Right view

    Right view

    • TracyP
    • Media item
    • in kapex progress station
    • Comments: 0
    • Category: Member Galleries
  4. Straight on

    Straight on

    • TracyP
    • Media item
    • in kapex progress station
    • Comments: 0
    • Category: Member Galleries
  5. zapdafish

    miter saw station question

    My problem is that I need to buld some cabs along one wall in my garage for badly needed storage now and I don't have the budget for a miter saw. I found the image below online as something I will base mine off of but I don't have nearly the amount of wall space available. I have about 7 feet to...
  6. D

    Table saw station

    View image in gallery View image in gallery View image in gallery View image in gallery View image in gallery I have been working on this table saw station for the past few weeks and have just about finished it. View image in gallery
  7. panel cutting station

    panel cutting station

    • DougW
    • Media item
    • cutting panel station
    • Comments: 0
    • Category: Member Galleries
  8. merrill77

    My boring sharpening station

    Pun not intended - it is a combination drilling / mortising / sharpening station. Seem like a strange combination? Read on... Firstly, I've needed to get my drill press and mortiser mounted somewhere for a while. Shuffling them around on various benchtops was getting tiresome (I have a small...
  9. BoringStation-sharpeningShelf2

    BoringStation-sharpeningShelf2

    My mobile boring/sharpening station with the sharpening shelf extended and the sharpening supplies drawer out (my first drawer ever!)
    • merrill77
    • Media item
    • drilling mobile mortising sharpening stand station
    • Comments: 0
    • Category: Member Galleries
  10. BoringStation-sharpeningShelf1

    BoringStation-sharpeningShelf1

    My mobile boring/sharpening station with the sharpening shelf extended - ready to use the worksharp.
    • merrill77
    • Media item
    • drilling mobile mortising sharpening stand station
    • Comments: 0
    • Category: Member Galleries
  11. BoringStation-mortiser

    BoringStation-mortiser

    My mobile boring/sharpening station with the mortiser rotated forward for use.
    • merrill77
    • Media item
    • drilling mobile mortising sharpening stand station
    • Comments: 0
    • Category: Member Galleries
  12. Boring station - Drill press ready

    Boring station - Drill press ready

    My mobile boring/sharpening station with the drill press rotated forward for use.
    • merrill77
    • Media item
    • drilling mobile mortising sharpening stand station
    • Comments: 0
    • Category: Member Galleries
  13. davejones

    MS Station w/ Snap-On Drawers

    Almost complete after getting sidetracked on several other projects. These are the Snap-On drawers from MrAudio815 (Matthew). I still need to finish up the DC setup, build a door for the center cabinet, and apply finish. I think I am going to try WB poly on this. The drawers and...
  14. W

    Need Some Mitre Station Ideas

    Well,I had a long weekend so I took apart a 12' long radial arm bench and opened up some serious room.Now I would like to come up with a Mitre box station with storage below it.I'm wanting to see some pix of what people have come up with for there own shops.I need some drawers and a long support...
  15. AmishWarlord

    Dremel Scroll Saw Station

    Hey Phillip, I saw you had a problem back in Feb with your 1800 saw not holding blades. Did you get that problem fixed? My new 1830 is doing good but I'd like to be ready if that problem creeps up on me. Mine doesn’t hold some spiral blades that I bought but I think that is more of the blades...
  16. Touchwood

    Sharpening station

    Hi All, There's been a lot of stuff lately about tool sharpening equipment and thought I'd share with you the approach I came up with circa 1993. There were very few inexpensive systems around then (in fact none), I was into turning and needed a better way (faster way) than hand honing. I...
  17. PChristy

    Someone was looking for a charging station

    http://www.woodmagazine.com/woodworking-plans/drilling/recharging-station/?sssdmh=dm17.385766&esrc=nwwood52_09&email=491035404
  18. S

    charging station

    Some time back, someone posted a pix of a hanging charging station for portable drill and charger. I can't find the picture. Does anyone remember who posted it or has anyone made one and have pictures? Thanks!
  19. DIYGUY

    Home made sharpening station

    This project started out when I found a beautiful 1/3 HP NOS Baldor motor on CL for pocket change. I had it in the shop for over a year with nary an idea of what I would ever use it for when the seed of an idea started germinating in my noodle. This was the outcome...
  20. Glennbear

    Weather Station #2

    Several weeks ago I made a weather station for my daughter in CT. I just completed another one for my other daughter in San Francisco. Same design as the first but using recycled longleaf/heart pine and a normal clock instead of a tide clock. Instruments and the plan which I modified are from...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top