spline

  1. mlzettl

    Olive Ash Burl and Wenge Coffee Table

    I recently completed a coffee table that I was commissioned to design and build. The customer had an olive ash burl slab that had been warehoused for over 20 years, and wanted me to make a coffee table. The slab had natural edges, and he wanted that appearance preserved. I produced several...
  2. G

    Cutting a spline in a long piece of wood

    I am building a patio table and ran into the issue where the 45degree joints at each end of the table just do not seem to have much strength. I was thinking of cutting a spline for the corners but two of the boards are about 87" long and would be hard to hold on a table saw to cut the spline...
  3. Flag display case

    Flag display case

    OIF Flag, maple & mahogany
  4. Flag display case

    Flag display case

    OIF Flag; maple & mahogany
  5. rick7938

    Picture Frame Spline Jig

    Does anyone have a plan or know where to find a plan for cutting the spline pockets in the corners of a picture frame? I think that I know how to build one, but would like to see the plans for one before I waste a bunch of material. Thanks for any input and advice.
  6. Joe Scharle

    Long Spline Jig

    I was using this yesterday and thought I'd post it in case someone might find it handy. More pix in my album. I also turn it on edge and use it for a sacrificial fence. Joe
  7. D L Ames

    TS Jig for cutting spline slots.

    Here is a photo of a jig I built for cutting spline slots in the mitered edges of stock used for small boxes. The jig is adjustable and can cut a slot centered in stock from about 1/4" to about 3" thick. I got the idea for making the jig adjustable after looking at plans for an adjustable...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top