solid

  1. DaveO

    Solid core doors?

    Would a solid core door with a faux raised panel look be of value to anyone? I would think that the depression created by the faux panel look could be easily filled with something like Bondo or Durham putty and a piece of hardboard laid over the top. Band the edges in hardwood and you could have...
  2. L

    Solid cherry chest of drawers

    I am going to Danville this week for extra 1/4 inch cherry for my cabinet doors. I would like to price plywood for future chest of drawers. What is normal thickness of side panels for chest? Would 1/4 be too thin, I think 3/4 maybe too thick. Lorraine
  3. JimThomasson

    Solid cherry fine linen cabinet

    My Mom asked me to build her a cabinet for her to keep her fine linen placemats and napkins in. I would have left it natural and just applied a hand-rubbed finish, but she wanted it to match the existing furniture in her living room. A friend from church had cut down a couple of cherry trees...
  4. jimwill48

    Solid Core Door For Benchtop Question

    I want to use a 30"x80" Solid Core Door Slab for a benchtop for a new workbench I'm building and have a couple of questions someone might be able to answer. I have found at both Lowes & HD, 30"x 80" birch skinned solid core doors, is there any diff in the two stores doors? Does anyone know...
  5. DaveO

    Solid wood drawer bottoms

    In my on-going saga of my sofa table, I would like to use a solid wood bottom in my drawer. Mainly because I don't want to buy some WO ply to do it with. I have milled, and glued 2 pieces of 1/2" QSWO to the width & length of the drawer bottom (11" x 20 3/4"). I plan to cut a rabbet forming a...
  6. Canuck

    Solid Wood Edge Banding?

    Have a pretty elementary question. (from a typical newbie:BangHead: ) If I am using solid wood for 3/4" plywood edge banding, how do I prepare the plywood edge? Do I just depend on the accuracy of my TS or should I cut the ply a wee bit oversize and make a couple of passes with a flush trim...
  7. woodguy1975

    Solid Wood Chest of Drawers (80" long x 48" tall) :D

    Well, I've moved into working on my next commissioned peice. It is a solid wood chest of drawers. The primary wood is genuine mahogany with maple drawers and some poplar used for dust frames. The peice will be 48" tall 80" long and 22" deep with 24 drawers and a section for A/V equipment. A...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top