screw

  1. Screw

    Screw

    In search of this screw
    • skysharks
    • Media item
    • screw
    • Comments: 0
    • Category: Member Galleries
  2. skysharks

    Help ID'ing Screw

    Hey all. I have been comissioned to replicate some dining room chairs. There 12 of these screws per chair. I am to build 4 chairs, so I would need 48-50 of these guys. Please take a look at the pictures and see if you could help me out in locating them. roughly they are 2 3/4" long, Shank is...
  3. L

    Wolfcraft Tapered Screw Setter Bit Set: Greensboro HD clearance

    Just a little set of 4 tapered drill bits marked down from $12.99 to $0.80 [Wolfcraft #1399404, . Snagged the last one at NW GSO Home Depot] Not sure if available elsewhere
  4. AAAndrew

    Ideas for a very small bench screw?

    I've started making a small work bench for my GIT (Galoot in Training) and it's going to be a very basic Roubo style bench made out of 2x construction lumber. I'd like to make a little leg vise as one of his favorite things to do is clamp up stuff, but I can't use any of the bench screws you...
  5. Joe Scharle

    Drywall Screw Gun Review?

    Anyone have a recommendation for a screw gun? Or experience using a dimpler.
  6. first wooden screw

    first wooden screw

    wooden screw #1.
    • 02blues
    • Media item
    • screw wooden
    • Comments: 0
    • Category: Member Galleries
  7. Toddler

    Kaeser rotary screw with tank and dryer $500

    Not mine. Never seen one at that price! http://raleigh.craigslist.org/tls/1153082261.html
  8. rick7938

    Porter-Cable Router Thumb Screw

    My neighbor has a couple of old P-C routers that use the thumb screw to secure the base to the motor rather than the newer latch mechanism. It appears that over the years the steel bolt has worn out the threads of the aluminum thumb screw, and now the threads are stripped and the screw can not...
  9. Douglas Robinson

    Ral CL: Kreg DB55 Kreg Forman DB55 pocket screw machine

    Kreg Forman DB55 pneumatic pocket screw machine - $500 (Knightdale) used only app.5 hrs like new. http://raleigh.craigslist.org/tls/982612728.html Not Mine! A new one cost $795 at Amazon. Here is a pic from there:
  10. michaelgarner

    Depth Adjusment Wheel Screw For a Bailey #3

    I find myself needing the screw for my bailey #3 (it’s the screw that holds the big brass knob behind the frog) I was wondering if anyone had some donor/salvage planes that I could buy one from. If it has the Brass wheel with it that’s cool, and if it doesn’t I have one that I can use. Thanks in...
  11. JRD

    Brass Screw Removal

    I'm looking for ideas, tips, hints, etc. on removing broken brass screws from a wooden box that I'm making. One, has broken off just above the wood surface, two are flush with the surface of the wood. My first thought, other than a few choice words, was just drill them out, but I want to...
  12. S

    workbench with 4 foot twin screw vise on the cheap

    .
  13. johnpipe108

    Poor man's RT Lead Screw

    Here it is, as promised, my lead-screw for my homebrew T-square RT fence : The main components are a piece of common 1/4-20 rod, a brad-hole T-nut (Servalite brand from the hardware specialty fasteners bins which I found at our California-based Orchard Supply Hardware), a piece of 1/2...
  14. SteveColes

    Glaser Screw Chuck Where?

    When Big Mike came over to give me lessons, he brought ov a Glaser screw chuck or least an equivalent. I promptly stole it from him:eusa_dancBut now I can't find. So I tried ordering one but can't find anybody selling them, except highland Hardware, but they are back ordered and they told me...
  15. C

    Wooden (oak) screw covers

    I had to screw through the 1/2 ply back of my cabinet to fasten an interior wood member. I don't really want exposed screws, even in the back, but I think the ply is too thin to countersink and plug. Thought of dowels but don't see how they do much structural good when glued into plywood. It...
  16. tdhetrick

    Screw recommendation?

    Does anyone have a good recommendation for wood screws that you can buy locally? I know this sounds like a weird question but I have been looking at Mc Feely’s http://www.mcfeelys.com/ square drive screws online, but can not bring my self to pay $8.00 in shipping for $24 in screws. I am looking...
  17. JRD

    Screw Top Turned Box

    I decided to try something different this weekend, a box with a screw on lid. Once you see the photo's you'll get the idea of how I did it pretty quickly, Simple, but it works very well. The wood is Mediterranian Myrtle, with Walnut to accent it. The Myrtle is apparently something of a rare...
    • JRD
    • Thread
    • box screw top turned
    • Replies: 11
    • Forum: Woodturning
  18. J

    Spalted Maple screw clamp

    DaveO is the only guy I know who uses spalted maple for a screw clamp, here's proof :lol: follow the link: http://www.ncwoodworker.net/pp/showphoto.php?photo=541 or
    • jeff...
    • Thread
    • clamp maple screw spalted
    • Replies: 4
    • Forum: Wood
  19. gator

    Pocket Screw Regestration Question

    I am building a triangular shape end table for a customer. The two sides are different lengths so the front corners are not exactly 45°. If I use pocket screws to attached the aprons, the two side aprons are ok because they are 90° at both ends but the front apron will have an approximate 45°...
  20. SteveColes

    Screw up (pun Intended)

    Ok, yesterday's disaster. Not only will it be difficult to get to screws to remove them (right now they spin) but How do I clean up the mess inside after they are removed? I think I really messed up on my assembly strategy

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top