rough

  1. willarda

    Rough to Ready and Hand Tool Sharpening

    I will be teaching two workshops at Woodcraft in Raleigh that some of you might be interested in. Contact the store if you want to register. Woodcraft Townridge Shopping Center 6582 Glenwood Ave. Raleigh, NC 27612 919-781-1911 Rough To Ready. July 8. 9-5 Participants will take a board from...
  2. jglord

    Rough to ready

    On Saturday July 8, Bill Anderson will be repeating his popular Rough to Ready class on hand plane use. You are welcome to bring your own planes to learn to tune and use your plane. All needed planes will be provided. To register, call the Raleigh Woodcraft store at 781-1911. The cost is...
  3. R

    Planing rough sawn pine

    I'm in Raleigh and have a stack of 5/4 rough sawn pine 10'-12', varying widths (6"-13") I need to have planed to 4/4. Total of 66 boards. It is too much for my bench top planers (Ryobi and Dwalt) to deal with. Anyone in the area that knows of someone that would help with this? I can rip and...
  4. D

    Rough Sawn Lumber

    I am looking for a lumber source near Greensboro of rough sawn lumber of any and all species. Is there such a place in say a 50 mile radius. Thanks in advance. Davis
  5. R

    Rough Cut Cedar

    I have about 10 rough cut cedar boards, 2 inches thick, about 12 inches wide and about 14 feet long. Very few knots. I want to re-saw them into 1 inch thick. They have been in a garage for about 7 years. So they are dry. Is this possible? I checked with some local cabinet shops and even with a...
  6. C

    Rough picture of my mantle clock

    Very rough, no sanding but here is some pieces I have made. Should be able to start sanding and assembly this weekend. http://clowman.spryken.com/clock/index.htm

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top