opinions

  1. rick7938

    Opinions on Jig Saws

    Well, my 30 year old Porter-Cable jig saw just bit the dust. Something inside shorted and burned up the guts, plus everything inside was worn out, so it is time to buy a new one. Since I have not bought one in so many years, I would like to get opinions from those who have recently bought new...
  2. rhett

    turbine HVLP opinions

    Any opinions on a good turbine hvlp system. My "boss" is getting less and less courteous with his spray booth. :crybaby2: I will only be spraying sealers/laquers. Thanks.
    • rhett
    • Thread
    • hvlp opinions turbine
    • Replies: 13
    • Forum: Finishing
  3. WoodWrangler

    FurniturePlans.com Opinions

    Has anyone ever purchased a plan from FurniturePlans.com website? If so, I'd like to know what you thought of the plans. The good and bad.
  4. cskipper

    Opinions re: different scroll saws

    We haven't discusssed this in a while, so who has what scroll saw and what to you like and not like about it?
  5. DaveO

    Opinions wanted

    I've been working on a Greene & Greene inspired sofa table. It's almost done. I busted my hump all weekend to get it to where it is now. I still have a few Walnut plugs to set and two M & T joints still to draw bore. And of course the actual finish. What I need y'all opinions on is the drawer...
  6. J

    Opinions

    Hi All, I just put up some nice knotty pine paneling in my basement, now looking to the bar area and having a time deciding what kind of wood to use in it that compliments the knotty pine. I am looking at the English Pub look with wainscoting and wood paneling. Any suggestions...
  7. WoodWrangler

    Eurkazone EZ Smart Guide System Opinions

    Looking for opinions from anyone who has used the Eurkazone EZ Smart Guide System (http://www.eurekazone.com/). It looks like a great gadget at an okay price, but is it really any good? I'd like to hear your thoughts -- as well as any alternatives available. I'm mainly looking for a tool...
  8. DaveO

    Opinions on Kreg pocket hole jigs

    The quest to spend the rest of my B-day money is on. I have thought about a new TS blade, more clamps and other things. But I have heard great things about pocket hole jointery, and that is something that I don't have a jig for. I have $100 to spend at Amazon and have been looking at the Kreg K3...
  9. WoodWrangler

    Any WoodRat Users with Opinions?

    I've been looking into the WoodRat (http://www.woodrat.com/) router jig, but just can't decide if it's a good buy. Is anyone using the WoodRat? If so, what do you think of about it? Can it create mortise & tenons easily?
  10. DaveO

    Hollow-chisel mortiser opinions

    I think that I decided that the B-day money burning a hole in my wallet will go to a mortiser. So far based on several reviews, including one magazine article review provided by Insomniac, I think that I will get the Delta 14-651 Mortiser. I looked at the General also, despite being a...
  11. WoodWrangler

    Leigh Mortise & Tenon Jig Opinions

    Has anyone ever used the very expensive Leigh Mortise & Tenon jig (link at bottom if you don't know which one I'm talking about)? Though out of my price range, I'd like to hear what others think about it -- in particular its ease of use and quality of the job. Give me your two cents! :-...
  12. C

    Design Opinions Needed...

    I am building a cutting board to present to a sponsor at an upcoming cub scout meeting. The board is glued up. It is 2 inches thick, 23 inches wide, 30 inches long, in walnut, S American mahogany, hard maple and cherry...heavy. On my past cutting boards I have simply used 1 inch diameter...
  13. hpetty

    Opinions on PC 7518

    I'm trying to decide between $250 cash back from Delta or a "free" PC 7518 router as my rebate. I've seen a few posts where members indicated they owned one, but I would like to hear some opinions. I'm finishing my router table and was planning to use my PC plunge router in it. But now I'm...
  14. D

    Opinions about Drawers.

    Boxers or Briefs???? Just kidding. I have still yet to make anything with drawers in it... I am very curious about how much of a pain they are to install. Dawn
  15. NCPete

    mortising machine opinions

    what does everyone think of this from Sears/Craftsman. does anyone recognize the manufacturer? What quality and durability can be expected from it? thanks.
  16. woodguy1975

    Ok guys opinions and critiques Requested

    I spent a fair amount of time sketching out the scrollwork for my bracket feet on the monster chest of drawers. I think I came up with something that looks pretty good for the scale of the peice, but figured I'd ask for opinions. So what do you guys think of this scroll pattern. Give me...
  17. Canuck

    Joinery Opinions

    There appears to be a vast degree of expertise here and I (as a novice) am interested in knowing what the overall joinery preferences are - Dowels, mortise and tenon, biscuit's,pocket holes etc.. I know that it would depend on the application, but I have been using dowels (w/DowelMax Jig) with...
  18. TimRice

    Looking for MLCS Router opinions

    I was browsing through a recent wood worker magazine and came across an ad for a 3HP. http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/marvel3hp.html I'm interested in opinions on the router, or other suggestions since I'm getting ready to buy one. Intended uses are...
  19. J

    Table Saw Opinions

    I am looking into buying a new table saw. Does anyone have any sugguestions. I think I would entertain spending up to about 900 dollars. It seems about the best I have found are the new craftsman saw that has an enclosed cabinet and 1-3/4 hp motor. The other saw that I looked was the new rigid...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top