mallet

  1. 69CG6675

    69CG6675

  2. 69CG6674

    69CG6674

  3. I know there is a mallet in there somewhere...

    I know there is a mallet in there somewhere...

  4. Dead Blow Mallet

    Dead Blow Mallet

    Maple and Purpleheart
  5. Dead Blow Mallet

    Dead Blow Mallet

    Maple and Purpleheart
  6. Dead Blow Mallet

    Dead Blow Mallet

    Maple and Purpleheart
  7. CarvedTones

    Is this gouge suitable for mallet work?

    http://www.grizzly.com/products/H0514 I have been offered one in trade for my WeCheer listed in the classifieds and the current owner has only used it a couple of times by hand.
  8. WoodWrangler

    Blue Spruce Mallet

    A little gloat... a lot of thanks! Shamrock (Mike) and I have become good friends since meeting on NCWWi and I've been working with him on the side on a few things ... and for that appreciation, he surprised me with a "thank you" gift ... needless to say I'm stoked! Expect nothing and the...
  9. S

    my first mallet

    .
  10. CarvedTones

    The 5 minute mallet

    One of my kids was trying to learn to carve using a piece of pine scrap I had been practicing beads on as a mallet, so I grabbed a hard maple off cut and made him a better one. It's no work of art, but it will probably outlast the tool.
  11. Douglas Robinson

    Third Mallet

    I made this, my third mallet tonight. It is Padauk and Maple. I finally got the dimensions, and tapers right and I like the transitions. Doug
  12. Douglas Robinson

    Black Walnut Mallet

    I used up some scrap pieces of black walnut I got a while back from jeff and made the following wooden mallet today when I got back from Klingspor. I hope to turn a round one soon. Doug
  13. PeteM

    Scrap wood mallet

    The handle is walnut - thanks to Kyle Joint is a tapered mortise with maple wedges. The head is a piece of zebra wood hollowed out, filled with lead shot and sandwiched between some mahogany. Another thank you to Mike for the leather on the faces.
  14. H

    Needing a Froe Mallet.......

    I'm looking at either making a Froe mallet myself or getting someone talked into turning one for me. Preferably made out of White Hickory with the head still in the round as being straight from the log. Only thing I need is the handle turned. Any one familiar with these and how hard would it be...
  15. Monty

    Turned mallet

    This is not a new project - I know several people have made this (including Woodguy). This is from an article in Wood magazine (issue 156). Since my workbench project is sort of at a standstill right now, I figured I would knock out another shop project I've been wanting to do...
  16. IMG_1800

    IMG_1800

  17. IMG_1803

    IMG_1803

  18. IMG_1804

    IMG_1804

  19. IMG_1809

    IMG_1809

  20. IMG_1781

    IMG_1781

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top