jointer

  1. S

    *SOLD* Robland X31 Combination Machine

    *SOLD* Selling my X31 as I have gained some shop space (big thanks to my wife!) and am purchasing stand alone machines anticipating some large projects. I purchased it used but was barely used due to the gentleman's poor health. I have spent about $2000 on upgrades to the electronics and more...
  2. J

    Laguna JX|8 vs. Jet JWJ-8HH Jointer

    Hi all, I'm looking to pick up an 8" helical head jointer in the near(ish) future. I've largely narrowed it down to either the Laguna JX|8 or the Jet JWJ-8HH. Curious to hear personal experience with either and/or both. I've seen some mixed reviews on the Laguna and their customer service, but...
  3. M

    Jointer Services Wanted

    Hello, I milled up some cherry wood as best I can for a glue-up, but I seem to be unable to get the gluing edges flat enough not to leave gaps. It’s close, but there are some obvious gaps that I’d rather not fill with the “sawdust and glue” method. I only have a table saw and a hand planer and I...
  4. D

    Hammer A3 41-A 16" Jointer for sale in Gastonia.

    Like new Hammer A3 41-A 16" jointer, with extension wings. I purchased this in 2019 and have used it lightly in my home shop. This is a 4HP 240V/30A single phase motor. The unit was originally $6,200 with all the optoins. Asking $5,400. All of the cutters are like new and have never been...
  5. mpholway

    SOLD Delta 37-866X Jointer with mobile base - $550

    This item is being listed as I have just upgraded to an 8 inch and need to clear space in my shop. It has been a reliable workhorse in my shop for years. I am listing it here first and will not post to C/L or local marketplace until after the weekend to give any of you first chance at it...
  6. M

    Baileigh woodworking machinery

    Hey does anyone have experience with Baileigh woodworking machinery? I have a line on a used ij-883p-hh. IJ-883P-HH - Long Bed Parallelogram Jointer with Spiral Cutter Head | Baileigh Industrial
  7. N

    Full Shop sale

    I live in Cary, NC and am liquidating my shop. Moving and change in life circumstances. All listed tools are less than 1.5 years old and have not seen heavy use. I was making furniture for friends/family mainly. If you're interested in anything, please send me a message. Not everything is...
  8. Cbranch

    Sold-For sale: Rockwell table saw/jointer-sold

    Vintage 9” table saw with 24” ripping capacity and 4” jointer with 27” bed. Both machines run on a single 1hp motor and are tuned to cut. Asking $275
  9. Grit12Gauge

    Jointer then Planer or vice versa?

    Working on purchasing more equipment for my shop and initially I wanted to get a jointer then a planer. First off, is this the correct purchase order? After doing countless hours of YouTube research and not finding answers, I ask the question.... do I really need a planer if I’m getting a...
  10. N

    For Sale Rockwell 8" Jointer

    I have a 8" Rockwell Jointer in decent shape for sale. It is a 3ph unit and has the steel stand. Cleaned it up some and everything moves as it should. Bearings on cutter head are in good shape, cutting blades look good, there is a knob missing on the fence lock and the arbor is missing to lock...
  11. S

    Inca 10” jointer/planer for sale

    I am getting a larger unit so I am moving my original unit out. $300 picked up in Cary.
  12. J

    New Laguna 12" Jointer - Motor to be installed in California

    Hi everyone, I just purchased a Laguna 5HP 12" jointer and am being told it will ship after they install the motor in California. That seems a bit odd, is that normal? I am a little worried they will ship a unit that has previously been returned. Has anyone been in this situation or ordered...
  13. charlessenf

    Delta Jointer Lock Lever Part #: 1347010

    Lock Lever for Delta 37-190 6" Deluxe Jointer Apparently, when I brought this home I laid it down on the 'Wrong Side' and bent the Lock Lever bolt. I have searched and found the part listed on several sites as "Not Available" or "Out of Stock" so I am looking for a vendor that has it in...
  14. Clifton

    Jointer Knife Adjustment pro wanted - Need Help

    Ive got a Jet JJ-12 planar / jointer combo. Cant get the blades adjusted. Need help from someone willing to do an on location teaching session to show me what im doing wrong. Have Dial indicator, tools etc... Willing to pay $50 + lunch + 6 pack of favorite beverage (to be consumed AFTER were...
  15. delta 8" jointer

    delta 8" jointer

    delta 8" jointer
  16. delta 8" jointer

    delta 8" jointer

    delta 8" jointer
  17. D

    This arrived today!

    Grizzly 8" Jointer. Pretty #### excited about it. Now, how to lift that beast onto the stand?
  18. D

    Craftsman model # 152.217060

    In the market for a 6" jointer and saw this on craigslist. Anyone have experience? They have it listed at $295 If I get it I'll want to put in a shelix head $358, brigning it to around $600. Worth it? Thanks in advance for any advice, David
  19. jonnyfontaine

    Laguna jointers

    Does anyone here have any opinions/experience with any of the Laguna models of jointers. It seems like every tool they make is the winner of several awards, I love my bandsaw of theirs I own. And I know it's petty but they look killer also, very modern chic haha and we all know that's the real...
  20. jonnyfontaine

    Grizzly 8" jointer G0490W

    I recently got a new above mentioned jointed and have been having tons of issues with like everytime I edge joint a board I have to readjust the board. I have plenty of nice straight edges and checked that the tables are coplaner, it's a parallelogram jointer. Has anyone else had any issues/...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top