hollow

  1. FLAMES_2-1

    FLAMES_2-1

    • DanJohnston
    • Media item
    • hollow surfboard surfboards wood
    • Comments: 0
    • Album: Hollow Wooden Surfboard
  2. Dylan_picking_up_his_board-1

    Dylan_picking_up_his_board-1

    21 pounds, 9'4" cedar, spruce board. Dylan's grandfather bought this for Dylan and sister Brooke.
    • DanJohnston
    • Media item
    • hollow surfboard surfboards wood
    • Comments: 0
    • Album: Hollow Wooden Surfboard
  3. Spalted Maple Hollow Form

    Spalted Maple Hollow Form

    10" Spalted Maple Hollow Form
    • woodArtz
    • Media item
    • form hollow maple spalted
    • Comments: 0
    • Album: Favorite bowls
  4. E

    Cyclopse Cat Hollow form

    This was a burl wrapped around about a 3" limb. I'm sorry I didn't get a picture of it before I started. View image in gallery View image in gallery View image in gallery View image in gallery View image in gallery View image in gallery
  5. Tommy Smith

    1st hollow form

    My 1st attempt at a hollow form. It was a bit of trail and error and the inside could use some work. A catch threw it completely off the lathe toward the end (you can see where it hit the tool rest on the top lip).Claro Walnut 3" high, 7 3/4 wide with the opening 3". This and all my turnings so...
  6. L

    Hollow Form?

    I have always heard two things on how to turn a bowl correctly. #1 leave no signs of how you attached it to the lathe. #2 Finish the inside just as good as the outside. How do you sand and finish a hollow form where you cant get to it? Thanks, Jeff
  7. N

    Hollow Form with Finial

    This is my first "multipiece" turning. The form is Walnut, about 3" is Dia x 2" tall with a Ambrosia Maple collar and American Holly finial I dyed black. The finial is 2 3/4" tall. Thanks for looking.
  8. N

    Walnut Hollow From

    After blowing out my first tall hollow form I had to give it a second try. I used my homemade hollowing tools and am very happy with them. I have found that I need to hone the edges occasionally to get better cuts. This HF is 7" tall and 4" in diameter. The hole is 1" diameter and the walls...
  9. Sanders Fine Woodworking

    Latest hollow form

    I finished this hollow form last weekend (twice turned, turned green in May 2010). The wall thickness is less than 1/8". It is fairly large at 4 1/8″ tall and 7 7/8″ wide at the widest point and has a 3" opening in the top.
  10. NCTurner

    Monkey Pod Hollow Form

    This is a small piece out of Monkey Pod it was something a bit different for me. Not sure I pulled of the execution as well as I had hoped. Finished in Shellac, and buffed. 4"x4"at top of copper handle. C&C's welcomed.
  11. Y

    hollow mortise chisel

    I just got my new drill press. I was really wanting a dedicated mortise machine, but my old drill press died first so I had to replace it first. My question to you guys is, what do you think about the bolt on hollow mortise chisel. Should I wait to get the machine or go with bolt on. Thanks, Jody
  12. W

    Tall Cedar Hollow Vase

    This is a Cedar vase that's hollowed all the way through. It's 19" tall X 5.5" dia. at the globe. I saw this technique in a British turning magazine and thought I'd give it a try and share it with you folks. It was turned into a cylinder and then parted in half just above the globe. The recess...
  13. froglips

    Chat about Turning in the Hollow.....

    I wanted to invite the turners or those with interest in turning to join in the New Member Chat this Thursday (Feb 11th) at 7:30pm. Our special topic for the night is Hollow Turning. If you have questions or projects or tips you want to talk about, come on out! You can read more about...
  14. WoodWrangler

    First Hollow Forms UPDATED PICS

    Other than some practice a while back, this is the "real" first hollow form that I've done. Not near done, but figured I'd better stop for the night since it hadn't blown up or flown from the lathe. Hopefully I can turn this into something. This was all made with the hollowing rig my...
  15. White Oak Vase

    White Oak Vase

    Spalted wood with a water tight interior
    • JRD
    • Media item
    • form hollow oak spalted tight vase water white
    • Comments: 0
    • Category: Spindle Work - 2010 Calendar Contest
  16. flyrod444

    A couple Hollow Forms

    Here are the last two HF's I finished. They are both finished with deft spray and buffed to a shine. the first one is 5 1/2" in dia. The second is 12" by 6" high. Both where hollowed using the #1 hooker tool John Jordan sells. Jack
  17. Bear

    How do you hollow a box?

    Hello all, I am in the process of trying to hollow out a box, inside diameter about 2" and 3 1/2" deep. What tools do you use and what procedures? I have tried 6 different gouges plus a tool using the CI0 cutter. They are all scary. The wood is semi-dry cherry. Thanks for any suggestions. Bear
  18. woodArtz

    Ever have that hollow feeling?

    Here's a new hollow form I finished today. I roughed out this blank back in September and finally got a chance to use my hollowing jig to finish it. It's made from a 12X5 piece of spalted maple. Sorry for the terrible pics. I have to get a bigger photo tent. :gar-Bi
  19. WoodWrangler

    Looking for Recommendation on Hollow Turning

    My interest is peaked in the hollow form turning (with the use of hollowing systems) and was wondering if anyone could make an recommendations on where to start learning more on the subject ... like a good DVD, or website with good "beginner" info.:eusa_thin
  20. gordonmt

    Delta hollow chisel mortiser 14-650

    I just broke off the tip of the 1/4 inch drill bit on my Delta mortiser. Where can I find a new drill bit? I looked at this thing and it looks rather unique so I don't think a long drill bit will work. Any ideas out there? Mark

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top