forrest

  1. BKHam

    Forrest Woodworker II TS blade

    i want to upgrade my crosscutting capabilities, let's say money is not a big concern in this. I've done budget buys until this point and now i'm ready for the best. first idea....it seems a lot of folks get the 40 tooth general purpose forrest blade and get great crosscutting results. I use a...
  2. M

    SCORE - Tool Gloat - Grizzly G1023SL

    I've been looking to replace my cheap, delta bench saw for quite some time. Each time I found a viable candidate via Craigslist I was beaten to the punch. So I then settled to buying new and had my heart set on the Grizzly G0715P Hybrid. The 3 HP variants were just too expensive for my...
  3. DWSmith

    Forrest vs CMT

    I purchased a Forrest 20 ct carbide rip blade earlier this year as a trial. It is a standard kerf blade and works reasonably well. When I use it I notice I get a lot of wobble in the cut no matter how slow I feed the stock. I can live with a little wobble since the rip line will be jointed...
  4. DWSmith

    Forrest Blades

    Earlier this year I purchased 40ct thin kerf blade at Woodcraft on a whim. Mainly it was to see if all the hype about Forrest was true. At first the blade performed well. Good cuts but there was a fair amount of splintering on the bottom side of a crosscut as opposed to their advertising claims...
  5. merrill77

    Forrest sharpening service - suprising results

    Unfortunately for me, the results are not surprising in a good way :no: First, a little background. I have a Dewalt 7640, which is a 50t combination blade that was compared favorably with the WWII a few years back (2005?) - not better than the WWII, as I recall, but in the same league. I paid...
    • merrill77
    • Thread
    • forrest results service sharpening suprising
    • Replies: 8
    • Forum: Reviews
  6. Forrest sharpening results

    Forrest sharpening results

    Forrest sharpening results (before and after) on a Dewalt 7640. This is difficult to photograph. The differences are noticeable in both visual and feel. This picture depicts the difference pretty accurately.
    • merrill77
    • Media item
    • forrest results sharpening
    • Comments: 0
    • Category: Member Galleries
  7. Forrest sharpening results

    Forrest sharpening results

    Forrest sharpening results (before and after) on a Delta 7657. This is difficult to photograph. The differences are noticeable in both visual and feel. However, the picture exaggerates the difference a bit.
    • merrill77
    • Media item
    • forrest results sharpening
    • Comments: 0
    • Category: Member Galleries
  8. M

    Forrest Woodworker II blades

    I found this place that sells Forrest blades. They have a promo on 10" 40T Woodworker II blades ($79.95 plus coupons for sharpening). Looks like a good price to me.. http://www.forrestsawbladesonline.com/ Michael
  9. L

    Forrest Chopmaster Blades - Amazon

    In case anyone else has been waiting for a price drop on the Forrest Chopmaster blades like I have, they dropped the price yesterday. I ordered one of the 10". They have been staying around $120. The 10" is now $106 and the 12" is $136. 10"...
  10. Makinsawdust

    ? for Forrest Blade Users

    I'm re-evaluating my current saw blade usage, brand, and sharpening service. I'm curious what the total cost of sending Forrest blades back in for sharpening runs? If you WWII users would share what the cost is including shipping I'd appreciate it. Thanks in advance. Rob
  11. Douglas Robinson

    Found on Amazon. Forrest WWII today only!

    Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor. $84.99...
  12. Douglas Robinson

    Amazon: Forrest WW10407125 Woodworker II $90.99

    Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Includes free shipping...
  13. Jon

    Forrest WWII and Freud Glue line rip

    I recently was able to buy a Forrest WW 30 tooth ripping blade and a 30 tooth Freud blade. I ran 12 feet of Mahogany on both. The Mahogany was 2x8 and I ripped it all down to 1.75 wide. I then Ran some Hard Maple and it was about the same as the Mahogany as far as width and thickness. I couldn't...
    • Jon
    • Thread
    • forrest freud glue line rip wwii
    • Replies: 16
    • Forum: Reviews
  14. Grgramps

    Forrest Woodworker II

    Amazon has this listed for $74.99 (free shipping) -- Not bad for a premium blade http://www.amazon.com/gp/product/B0000223VR/?tag=toolseeker
  15. NCPete

    Forrest WWII TK $71.99!

    Use this promotional code 200FFPTA for just about 20% off at Amazon.com for the WWII :eusa_danc this promo was discovered by accident when I cruised over to BT3Central from another post here.
  16. J

    Buy Forrest WWII for less than $70

    Amazon is currently running WWII for $89.99 less instant rebate of 10%. Buy two and take off $25 promotion, brings cost per each to less than $70. Check Woodnet for exact details of how this works-Bruce
  17. J

    Forrest WWII-$89.99

    Got the Oct sales flier from Rockler and there it was- Forrest WWII for $89.99 through Oct 29. Both thin kerf and 1/8" kerf blade for the same price. This is about the same price that guys a Charlotte show were charging last year.
  18. S

    Forrest WW II Thin-Kerf Blade on sale

    Forrest WW10407100 Woodworker II 10", 40-Tooth Blade for Table Saws (3/32" Thin Kerf) http://www.amazon.com/gp/product/B0000223VR Just ordered mine!! $63.94 with the free shipping option.
  19. chris99z71

    Forrest WWII Blade

    So my understanding is that the Forrest Woodworker II is about the best table saw blade on the market. Is this correct? Also, where is the best palce to buy one? I'm looking at the 10" 40T 1/8". I'm getting closer to being able to set up and run my saw and I figure it should have an...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top