fire

  1. Rosewood Fire Piston

    Rosewood Fire Piston

    First Fire Piston with EBPrimiticves Brass insert
    • oldetoolworkshop
    • Media item
    • fire piston
    • Comments: 0
    • Category: Turning Projects
  2. Robbie's Woodworking Projects

    Robbie's Woodworking Projects

    • captaincox2525
    • Media item
    • board coffee department fire holder mug
    • Comments: 0
    • Category: Member Galleries
  3. Tarhead

    RPM Wood Finishes Group Factory Fire in Hudson

    They produce the Mohawk finshes line there. Glad the fire didn't get to the Nitrocelluose. This will impact their business. Looks like a big loss. http://www.wcnc.com/home/Chemical-plant-fire-forces-evacuations-in-Caldwell-County-122778109.html
    • Tarhead
    • Thread
    • factory finishes fire group hudson rpm wood
    • Replies: 4
    • Forum: Finishing
  4. N

    Fire Piston Prototype

    I've wanted to try an fire piston for some time, so while waiting on some roughed out hollow forms to dry, thought this would be a good time. For those of you not familiar with a fire piston, it works on the same principle as a diesel engine. Use compression to start a fire. The fire piston...
  5. Fire Piston 2

    Fire Piston 2

    • Nate Davey
    • Media item
    • 2 fire piston
    • Comments: 0
    • Category: Member Galleries
  6. Fire Piston

    Fire Piston

    • Nate Davey
    • Media item
    • fire piston
    • Comments: 0
    • Category: Member Galleries
  7. IMG_00492

    IMG_00492

    fire decal I would like to make this into a pattern and try and scroll cut it.
    • mtnfyre
    • Media item
    • decal fire
    • Comments: 0
    • Category: Member Galleries
  8. dlrion

    Fire Safety

    After my "The Fire has been lit" post, everyone thinks I am going to burn myself down! Well I have one of these..... View image in gallery DO YOU? :rotflm: :gar-Bi
  9. dlrion

    The Fire has been lit!

    OCT 1'st! Temp's are high 70's to low 50's!!! I declare woodworking season OPEN!!! I got this new stove for $25 on craigslist, and fuel it with old chocks the air force throws away!!! This weekend was my ritualistic first burning!!! Woodworking season smells like flannel shirts...
  10. decibel

    Almost started fire with CA glue

    Hopefully you guys know this or can at least explain to me why. Anyway I was glueing the tubes in some pen blanks the other day and just happened to have an old cotton rag on on my assembly table and quite a few drops landed on the rag. I'd say within 10 seconds the rag was smoldering white...
  11. W

    Woodburner Shop Update

    I’ve finally found some time to post an update on my new shop. Last March, my shop burned to the ground ( http://thewoodwhisperer.com/a-devastating-shop-fire/). View image in gallery My original shop was approximately 400 square feet (20’X20’), with an unattached storage shed (10’X16’)...
  12. W

    Burning down the shop...

    Hello... My name is Mike and I'm a woodworking addict! Although I've been dabbling in woodworking for over 35 years, I had a situation in my shop last March that's changed my life. http://thewoodwhisperer.com/a-devastating-shop-fire/ As bad as it was, the road to recovery has restored my...
  13. flywelder

    I Seek your ideas for a fire wood rack design

    I need to build a sturdy free standing fire wood rack. I need to get my wood off the ground and organized/cleaned up. flywelder
  14. scsmith42

    Fire recovery update - the new shop July '09 update

    It's been quite a while since I updated this post, and since I have a few extra minutes it's a good time to bring it current. Since my original post has been closed, I'll start a new one with the latest update. I've been using the shop (and still working on it) for the past few months. It's at...
  15. CrealBilly

    FireFox 3.5

    As you can see things over lap with FF 3.5 - just thought I would let everone know with reset zoom (normal) I had to zoom out in order to get North Carolina Woodworker page to look right again. FF 3.5 is F A S T :thumbs_up View image in gallery Thanks
  16. J

    Fire up the Grill!

    Kroger has their in house brand of Bratwurst, or Italian Sausage on sale this week - $1.99 for 18 ounce package. Tonight for Father's Day, my wife's husband grilled me some. Served with boiled potatoes and sour kraut. Yum, yum!
  17. scsmith42

    Fire recovery update / the New Shop

    Several folks have asked me about how things have been coming on reconstruction of my shop following the fire back in June. My plans are to incorporate my personal woodshop into a new building that will house the post-production equipment for my milling and drying business. Last year I made...
  18. jmauldin

    [Problem-Gallery] fire engine bed for grandson

    I just posted some pics of a bed I made for our grandson. Wanted it to show up on the home page but it ended up in the photo gallery. Can you also post it on the home site? Jim
    • jmauldin
    • Thread
    • bed engine fire grandson problemgallery
    • Replies: 1
    • Forum: Help Desk
  19. C

    speaking of fire....

    Your home should be a safe haven. But do you regularly check for home fire hazards? If not, there is the potential for danger. Fire departments responded to nearly 400,000 home fires in 2006. That’s why the theme of Fire Prevention Week 2008 is “It’s Fire Prevention Week: Prevent Home Fires!”...
  20. Bryan S

    Those who wanted fire extinguishers

    Several weeks ago I posted this thread offering fire extinguisher for members of this forum. I deeply regret that I will not be able to make this happen. I am not willing to discuss the reasons on a public forum so I ask that you trust me that the reasons are justified. I thought the...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top