event

  1. Hmerkle

    Even more fun at the Picnic

    We are considering having a "mini" Hand Tool Olympics at the picnic. Following are some of the ideas and I will post another thread with a poll to get everyone's input. (You can pick multiple items in the poll!) Handsaw - Rip a board - Saw to a line The event would be timed Judged for...
  2. C

    Lie-Nielsen Handtool event

    Went to the Lie-Nielsen handtool show at NC State today. I had not been to one of these events before. Very informative. You can try all their tools and watch the experts set up and adjust the planes close up. I learned techniques that apply to any bench plane of whatever brand. The...
  3. B

    Hand Tool event this wkend - you attending?

    Who is attending the Lie-Nielsen Hand Tool Event this weekend? If attending, which day? I hope to make it again this year but am struggling with leaving a teenager home alone unsupervised with a new license :eek:
  4. D

    Lie Nielsen Event NCSU Craft Center Jan 20-12

    If you've ever wanted to test drive any or all the LN products, this is your chance. I went last year, having never touched a LN tool, and it cost me some money. They had pine or popular to make shavings with, but if you're interested in figured wood, better bring your own. Here's a link...
  5. cskipper

    Closed thread for Raleigh Klingspor event

    I closed the thread on the Raleigh posts. Maybe it will be less confusing if we title the Hickory show starting like "Hickory Woodworking Extravaganza".
  6. cskipper

    Thanks to all participants at the Raleigh Klingspor event

    I want to thank Coleman (and other folks from Klingspor) for letting us be a part of the event this past weekend (9/17). Also a special thank you to the folks who demonstrated their skills (especially the CA finish on the pens). I apologize for not recognizing folks by name, but I am afraid...
  7. Trent Mason

    Raleigh Klingspor Event

    Given Dennis' post in the meeting minutes thread, I thought I would start a separate thread about it. Typically, don't we need volunteers to do demos and to to man the NCWWer table? Perhaps this has all been setup already, but if not, we need to get a thread going ASAP to get some people...
  8. scsmith42

    Woodworking related event in the Triangle Labor Day weekend

    Folks, if you don't already have plans for Labor Day, you might want to consider visiting Silk Hope, NC and attending their "Old-Fashioned Farmers Day event. Their facility has a complete, steam powered, belt fed lumber operation that includes a sawmill, double planer, edger, resaw, and...
  9. woodArtz

    Hillsborough Last Fridays Event

    Hey Folks, I'll have a table at the Last Fridays event this evening. Food, Fun, Music, Arts... :eusa_danc If you're in the area, pop on by and say hello! Bob
  10. ScottM

    Agri Civic Center Event

    Getting NCWW members to commit is like herding cats. My suggest is to start pushing and create a demo schedule which you keep public so folks know who and what is demoing. Some members do better with a push so I would PM folks like the following and ask if they can help: Sawman101 PeteM TedAS...
  11. ScottM

    Greensboro Turning Event

    There is a NC Turning Organization that host a symposium every year. Rob and I attended in 2009 and sold a few raffle tickets. Not a big money maker even though we did manage to sell a couple raffle tickets to a lady and gentleman from CA. More important then that we gained a few new members...
  12. Kenderc

    1 day event! Historic preservation trades school in Tarboro

    For those interested, there will be a historic preservation trades school in Tarboro on 30 April. Quoted from the news release. "The event is sponsored by Edgecombe Community College and will be held at Oak Grove Farm and St. Anne’s Chapel at the intersection of Howard Avenue and McNair...
  13. scsmith42

    The "Roubo" slab milling event

    Wow - what an incredible day! A number of NCWW members, family and friends gathered at the farm on Saturday to participate in milling up some quartersawn red oak slabs for "Roubo" style workbenches. This event, hosted by NCWW member David Keller and I, utilized two different sawmills, a dried...
    • scsmith42
    • Thread
    • event milling roubo slab
    • Replies: 11
    • Forum: Wood
  14. scsmith42

    Roubo Workbench top event postponed due to weather

    In case you were planning to attend and miss the other thread, the Roubo-style workbench top milling event planned for Saturday February 5 has been postponed due to weather. It's been raining here at the farm all day today, and the forecast is for the rains to continue up until late morning...
  15. B

    Lie-Nielsen event in Raleigh this week

    For those of you near Raleigh, I highly recommend this event. They give you the hands-on opportunity to use most all Lie-Neilsen tools.
  16. B

    Lie-Nielsen Hand Tool Event in Raleigh

    For those close enough to participate the Lie-Nielsen Hand Tool Event road show will be in Raleigh in January. These are very informative "mini demos" with brief instructional programs and provide an opportunity to use and "play" with a lot of high quality tools. Highly recommended and yes...
  17. Bas

    Steambending at the Klingspor Woodworking Showcase event

    The Woodworking Showcase event at Klingspor yesterday was terrific. Demonstrations, beautiful woodworking and a chance to catch up with some old friends. Phil "Mad Scientist" S. brought some intriguing equipment to do steam bending. For thin stock, you can do your bending using a pipe heated...
    • Bas
    • Thread
    • event klingspor showcase steambending woodworking
    • Replies: 2
    • Forum: General Woodworking
  18. Bill Clemmons

    Greensboro Woodcraft event

    Just in case you haven't already seen this. I got this flyer in the mail, but can't find it on their web site, so I'll post it here. Fall Woodworking show Friday, Sept. 24, 9a-7p Saturday, Sept. 25, 9a-6p Demos all day long * 10% off all power tools * 15% off Kreg and Fein acc's * 30% off...
  19. ScottM

    Thomas Day Event - October 9th

    This fall there were be an exhibit of the works of Thomas Day at the Raleigh Museum. Our own Jerome Bias is a resident expert on Thomas Day. Jerome has agreed to conduct a special guided tour for North Carolina Woodworker members.:notworthy: The event is free. :icon_thum The tour will be on...
  20. B

    Lie-Nielson event

    On May 14 and 15, 2010. The Charlotte Woodworkers Association is hosting Lie-Nielson. The event will be at the Jackson Park Ministries workshop. This is the site of the Charlotte Woodworkers meetings. The address is 4001 Sentry Post Road. Exit I-85 or I-77 at Billy Graham Parkway and head for...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top