doors

  1. John Reeves

    Looking for tips on insulating gagage doors

    I am slowly improving the garage/workshop. It is a two car garage and I want to insulate the two roll up garage doors. They are 9' wide segmented roll up doors. There are 4 panels per door about 20" tall and 9' wide. The inset seems to be a thin MDF that does a poor job of insulating. I...
  2. adowden

    Finish help for Hard Maple Cabinet Doors

    I need to finish some hard maple doors and a face frame. I have never worked with hard maple, but I have read that dyes work better than pigments because of the tight grain. I have never used dyes. Could anyone offer any fairly simple process to dye the doors? The color the customer wants is...
    • adowden
    • Thread
    • cabinet doors finish hard maple
    • Replies: 5
    • Forum: Finishing
  3. DaveO

    Twisted inset doors -FIXED

    I just mounted the doors in the lower cab of my kitchen hutch. They have a slight twist to them, about a 1/8". They are inset, flat panel doors with two panels per door. Other than remaking them, which I have already done once :BangHead: :BangHead: any suggestions as how to either take out the...
  4. DaveO

    Free cabinet doors

    Anyone want a pair of flat panel shaker style cabinet doors 28" tall x 23¾" wide. Because I needed a pair that are 28" tall x 21" wide. I am a complete DA :5dunce: :5dunce: :5dunce: I cut my rails 22" long (including the ½" tenons) for a 21" wide door. I didn't consider the width of the stiles...
  5. A

    Trimming doors- simple X-cut sled mod *w/pics*

    After the trouble I had trimming the last set of doors for my backbench upper cabinets I decided there must be a better way. So I made a simple, temporary mod to my X-cut sled that does the trick. Since my sled has a low (slightly > 3/4" high) fence I was able to mount a piece of ply to the top...
  6. nelsone

    Kitchen Cabinet Doors

    Can someone recommend a good place to purchase replacement cabinet doors. I'm doing some work for a gentleman that also wants to replace the cabinet doors in his kitchen and I don't have the time or tools to build what he needs. Thanks for the help!
  7. D

    How do I make slightly curved raised panel doors?

    Anybody ever successfully try this..... If so, how did you do it? I got asked to consider making a credenza that would be about 10' wide, 36" high and have a CURVED :roll: front on it. In the middle the radius would extend forward about 12" further than the left/right of the cabinet. This is...
  8. B

    8' Interior Flush Doors

    I am looking for 8' x 3' interior flush door blanks. Does anyone out there know of a source? Basically, I am looking for doors generally used in commerical/industrial settings. These doors a full PB core, solid frame and orak or birch flush skin and are pretty heavy. Any ideas, pointers are...
  9. cskipper

    Raised panel doors

    LOML finished the upper kitchen cabinet doors. They are beautiful (yes, I am biased but they really are awesome!). Here are some pictures: The unfinished wall will have another cabinet and tiled back board between it and the upper cabinet. John did a terrific job on these cabinets but...
  10. Some of John's cabinets and raised panel doors

    Some of John's cabinets and raised panel doors

    More upper cabinets with raised panel doors.
    • cskipper
    • Media item
    • doors panel raised
    • Comments: 0
    • Category: Member Galleries
  11. Panty and side upper cabinet

    Panty and side upper cabinet

    The unfinished wall under the caibnet will eventually have a lower cabinet added.
    • cskipper
    • Media item
    • doors panel raised
    • Comments: 0
    • Category: Member Galleries
  12. Cabinet over and beside fridge.

    Cabinet over and beside fridge.

    Here are several pictures of some of the finished kitchen cabinets and raised panel doors.
    • cskipper
    • Media item
    • doors panel raised
    • Comments: 0
    • Category: Member Galleries
  13. erasmussen

    cabinet doors

    I got all the rest of the cabinet doors glued up and ready to sand. just posted a couple of pictures of them
  14. hing holes

    hing holes

    • erasmussen
    • Media item
    • doors
    • Comments: 1
    • Album: Kitchen
  15. doors ready to sand

    doors ready to sand

    • erasmussen
    • Media item
    • doors
    • Comments: 0
    • Album: Kitchen
  16. S

    Pocket doors???

    I am thinking about building pocket doors into a small entertainment center. I have no knowledge of pocket doors. Before I go to plan B, does anyone have a suggestion on how to make them? Thanks!
  17. erasmussen

    Cabinet doors

    I got the doors for 1 section finished and hung posted a picture in my album:mrgreen:

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top