depth

  1. merrill77

    Brief review of iGauging Snap Depth gauge

    Picked up one of these from Hartville Tool this week ($15 with free shipping) and had a chance to play around with it a bit today. It is designed for measuring the depth of dadoes, rabbets. It measures in metric and inches with an optional fractional display mode (shown): It comes with 1" and...
  2. eyekode

    Shop made PM1150A depth stop

    Earlier this year I bought a wonderful PM1150A from Wayne in Mocksville but it was missing a depth stop. I hadn't really needed one until last weekend when I started the joinery on my bench. When I first got the press Bob Vaughn was nice enough to give me lots of advice on my questions. I...
  3. KenOfCary

    Looking for Stanley Brace Depth Gauge

    I'm looking for a #47 Stanley Brace Depth Gauge. Anyone seen one advertised anywhere? Thanks, - Ken
  4. eyekode

    Replace drill press return spring (and depth stop)?

    Through an act of stupidity I broke the return spring on my newly acquired PM 1150A. If you must know it did not come with the depth stop and the first time I touched the thing I lowered the spindle (much) too far. Anyway I opened it up today to take a look. The tab that goes through the rod...
  5. G

    Question on dado depth

    I am going to be building some cabinets this weekend (if everything goes according to plan). I plan on using 3/4" plywood for the sides and 1/4" plywood for the top, bottom, dividers, and back. How deep of a dado should I cut for the divider? It will be halfway up (4') if that matters. I...
  6. DSC08143

    DSC08143

  7. Rob

    Bowl depth gauge

    Does anyone have any pictures of one's they've made? Thanks.
  8. G

    New, ultra modern, high tech, state of the art, depth gauge

    I decided to try and make a depth gauge for when I make boxes. Below is a picture of what I came up with. Simple, but it seems to do the trick. It also works for small, repeat small, bowls.
  9. depth gauge

    depth gauge

    depth gauge
  10. farmerbw

    Dado depth?

    I currently re-started working on a play table for the kids and am sort of hung on my assembly method. The table is pretty simple, it's got a 3/4"x35"x50" BB top and I'm using 13/16"x5" Poplar for the sides. I was planning to have the sides be flush with the top and to attach them via pocket...
  11. michaelgarner

    Depth Adjusment Wheel Screw For a Bailey #3

    I find myself needing the screw for my bailey #3 (it’s the screw that holds the big brass knob behind the frog) I was wondering if anyone had some donor/salvage planes that I could buy one from. If it has the Brass wheel with it that’s cool, and if it doesn’t I have one that I can use. Thanks in...
  12. Joe Scharle

    Depth Gauge

    Here's a way to get more use/utility from your dial indicator. Yesterday I plowed a dado that was 1/64th too deep. It made a difference. This morning I made this and it works! As you can see, I didn't spend much time on it, but now I know it works, I'll dress it up later. I wanted to post this...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top