cutting

  1. rick7938

    Cutting Groove in Cutting Boards

    I am starting my annual Christmas projects. This year I am making hard maple cutting boards with cherry trim. The trim consists of splines of cherry pegged into grooves at the end of the butcher blocks. One is flush with the end of the cutting board; the other has a finger or hanging hole in it...
  2. Glennbear

    Cutting solid core doors

    I am planning on making some workbenches using birch veneer solid core doors and have to cut some down. I planned on taping the cut line and prescoring with a knife. Any other suggestions to eliminate splintering of the paper thin veneer ? Thanks :wsmile:
  3. Joe Scharle

    Cove Cutting Table Saw Jig

    http://www.ptreeusa.com/edirect_092608.htm David Hughes has a Rockler copy for $50 :tool:
  4. Joe Lyddon

    CA Glue... Condition wood before cutting?

    I am about to make a few drawer fronts which will basically be 3/4" Cab. grade ply centers with 1/2" x 1-1/8" custom cut molding around the edges, like a picture frame... glueing using a 1/8" ply spline for both pieces. edit: To match other drawer fronts in his kitchen. I will be making...
  5. farmerbw

    Cutting Logs square?

    Can anyone recommend a way to cross cut logs so that they're "square" (pics below)? I'm looking to cross cut some maple, and eventually other species, logs which are in the 4" to 6.5" diameter range to use for furniture legs. While I have found a company that can provide them with reasonable...
  6. DaveO

    Anna's cutting board...

    One of my wife's friends is getting married next month. My wife asked me to make something for a wedding gift. Seeing as I traditionally make a cutting board for the newly-weds. That is what I decided to do. But being the glutton for punishment that I am I decided to try something new and...
  7. farmerbw

    Cutting drawer openings

    Was wondering what the best way to cut drawer openings from solid stock is. I'm going to attempt to build my first complete small (40lx30wx21h) coffee table and am trying to get an idea for what I'm going to be getting myself into and what tools or tool accessories may be required. I've got a...
  8. Jon

    Cutting board

    A customer of mine wanted a small cutting board something unlike anyone else has something she can serve cheese and crackers on this is what i came up with. What do you think? Its curly maple and Bloodwood and just a small bit of purple heart.
  9. Jon

    Basket pattern cutting board

    has anyone seen the pattern I am talking about or if you have a picture of it could you post it?
  10. Mark Stewart

    last supper cutting

    I have added a new cutting in my members gallery It took me almost a month to complete. I hope you all enjoy this cutting.
  11. Mark Stewart

    New kid on the cutting block

    Hi there to all Just a note to introduce myself and say thanks to Cskipper for introducing me to the rest of you all. I have posted some picks of the work I have done and hope you all enjoy . I scroll mostly but just bought a lathe hope to be turning things arouns real soon Thanks Mark
  12. Joe Scharle

    Rockler Cove Cutting Jig

    Works better than 2 sticks clamped to the table and cheaper than buying all the parts and making my own, with the 15% off and free shipping. If you have a large adjustable Right Triangle setup is real quick. Just made a bracket foot; took less than 30 min total.
  13. T

    Finished cutting board

    Morning all, Finished this last night. I've been knocking a few of these out for gifts, some tool money as well....seem to go over really well.. 1"Tx12"wx16"L From left to right: white oak, black walnut,brazilian cherry,american cherry,maca,curly maple,purple heart. Should have taken the picture...
  14. Douglas Robinson

    Freud LU92M010 10-Inch 60 Tooth MTCG Ultimate Laminate Cutting Saw Blade with 5/8

    Freud LU92M010 10-Inch 60 Tooth MTCG Ultimate Laminate Cutting Saw Blade with 5/8-Inch Arbor 10-inch, 60TPI, MTCG, 5/8 inch arbor Ultimate laminate blade for corian, melamine, laminates Each tooth has modified triple chip grind Zips through solid surface or single & double laminates Chip-free...
  15. cskipper

    Appropriate for the day - new cutting

    I cut this last weekend, but hadn't posted it yet. Obviously it doesn't have a finish on it (is there a behavior pattern here?). Today seems like an appropriate day for posting this - Happy Easter
  16. cskipper

    Can I post a picture of a recent cutting?

    It says FACHRISTITH (faith in Christ). May I post it or does it conflict with any guidelines? It may take all evening to actually get it to upload, so it is not yet available for viewing.
  17. K

    New rule for cutting drawer fronts

    We are all veterans of the golden rule of "measure twice to cut once". I have now discoverd a new cutting rule. When cutting solid cherry drawer fronts for a drawer which is 8 3/4" deep, always used the 3/4 mark that is to the left of the number 8. If you use the one to the right of the 8 you...
  18. jsjordan

    Need Advice on Cutting Dead Tree for Lumber?

    We have a large Cypress tree at my Moms that's been dead for a number of years now but is still standing. The reason is that it sits at the bottom of a steep 30 foot+ bank on the waters edge and I havent figured a good way to get it cut and hauled up without tearing up the bank and...
    • jsjordan
    • Thread
    • advice cutting dead lumber tree
    • Replies: 3
    • Forum: Wood
  19. redhawknc1

    Cutting Boards Finished.....

    Finally finished 2 cutting boards that I've been working on. One is Purple heart and hard maple, the other scraps (poplar?). The Performax 16-32 was a lot of help on this project! Ship these off to my two daughters and make me one later. Future yard sale items I bet! Now, starting on a chisel...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top