couple

  1. CarvedTones

    a couple of wet/green wood truisms

    A couple of truisms I got from a bowyer's site. As far as bows are concerned, they are truths, but for general woodworking, particualryly flat work, there may be some additional considerations... 1 - Wood dries from the outside in. If you are going to shape the wood smaller, do it while wet...
    • CarvedTones
    • Thread
    • couple truisms wet or green wood
    • Replies: 0
    • Forum: Wood
  2. Rob

    Completed this a couple weeks ago

    Spalted Maple bowl, Phillip (ptt49er) gave me a while ago. Finished it with Danish oil and paste wax. Still working on the photography. I need to figure out how to get some more shadow, you can't really judge the size of the bowl. It's about 9" in diameter and 6" tall.
    • Rob
    • Thread
    • ago completed couple weeks
    • Replies: 10
    • Forum: Woodturning
  3. Douglas Robinson

    A couple of comments from the picnic

    I just wanted to say that it was great to see everyone at the picnic. I always regret that there isn't more time to talk with everyone. I wanted to say this while I was there, but forgot, I want to thank Sapwood, Gator, Tomferone, and of course Steve Coles, the exiting Board of Director...
  4. redhawknc1

    Added a couple more planes...when will it stop?

    Built a plane till, filled it up. Have enough to fill another and haven't even built it. Just have a thing for planes and chisels. Got this one in the mail today. What a week! Have pics of the Miller Falls No. 9, just sharpened the blade and wiped it off. It works wonderful. A very nice example...
  5. Tar Heel

    Just a couple of simple bowls

    There's nothing special about these rather ordinary looking bowls but I thought I would post them anyway. The walnut bowl is from a small piece of walnut that Gary (NC Turner) gave me. It was almost as tall as it was wide. The final dimensions of the bowl are 4 5/8 x 3 1/4. I call it my sunrise...
  6. T

    I thought I did this a couple years ago

    I'm Rick DiNardo. A lot of you knew that. The rest of you do now. My main business is The Moulding Source. See link below. My secondary business is The Woodworking Source. See Ad/Link to the right. Right below the Klingspor ad. That's right, the one with the pretty picture. ..............Are...
  7. gesiak

    Turned a couple more pens... also a question..

    Just finished turning a couple of Euros. They are for a friend who owns a millwork shop as payment for a whole bunch of oak, cherry, maple, sapele, walnut, honduran mahogany scrap... His definition is if he cant sell it, it's scrap..... Now, the question....... Does anyone have...
    • gesiak
    • Thread
    • couple pens question turned
    • Replies: 13
    • Forum: Woodturning
  8. jimwill48

    A Couple of Completed Projects

    Here's a couple of recently completed projects. A white oak Adirondack Chair and Ottoman, finished with a outdoor oil. And a Half Round Table made of poplar and painted. James
  9. flyrod444

    A couple of HF's CaptnA spoke of.

    These are a couple HF's that I showed at our last club meeting. They are turned from the same cherry burl. I parted it in half and turned both of them end grain. The first one is 9" tall by 5" dia. with the base being 1 1/2". Both are finished with danish oil and buffed. I learned something from...
  10. gesiak

    Turned a couple more pens

    Since we were getting a whole lot of rain here in the Chicago area, I went into the garage and turned a couple more pens; The first was a Cocobolo Cigar: The second was a Cocobolo Euro: And the third is a Euro as well but not quite sure what type of wood, Thers is some spalting but cant...
  11. rcflyer23

    A couple of Amboyna Burl

    Had a little time in the shop over the last week and made a couple pens for my wife and myself. The first is a Majestic Jr. the second is a black titanium cigar
  12. T

    Advice on technique? Couple of issues

    Hi all, Jointer: Seems I must be doing something wrong here...I have an 8" jointer, never had any issues with it. Do not know if I just noticed it or I have always had the problem but, when I lay one of the wide faces down to flatten it, the end up front always ends up noticeably thinner. I do...
  13. 6

    A couple things from my house and a question

    So I've got these Doug Fir brackets a made from ripped down glullams and a walnut front door that I need to finish. I didn't make the door but did the brackets. I really would like to use the best clear finish possible and would like to use the same product for both, if there is one. What...
    • 6_Myles
    • Thread
    • couple house question things
    • Replies: 4
    • Forum: Finishing
  14. ChrisMathes

    A couple of projects

    Here are a couple of projects I finished recently. First is the wine rack that was in Wood Mag this fall. I thought it was kind of cool...my wife isn't crazy about it...oh well, at least she is honest with me...I need that honesty! It is be maple and walnut. Second is a bandsaw box...I love...
  15. sawduster

    couple of dragons

    Had to take a break from the commission work and do a little something for me :mrgreen: couple of mini-clocks Ambrosia maple from Jack ( saw4you) Patterns by Steve Good #3 FDUR BLO and Deft Thanx for lookin' :mrgreen:
  16. flyrod444

    couple more ornaments

    I've seen a lot of beautiful bird houses on the net lately so I thought why not try one my self. This is the first bird house I've ever done. Here is what I ended up with and another ornament. The birdhouse is only 3" tall made from osage and mahogany. The other ornament is 6" tall made from...
  17. CarvedTones

    A couple of Thanksgiving shop tours

    Over Thanksgiving, I had a chance to visit a couple of shops. They belong to a father and son: That's Papa Louis and his son Ricky. My parents divorced in my teens and Louis has been my mother's companion for over 25 years. For reasons financial and personal, they never married, but the...
  18. JackLeg

    Met a couple NCWW's

    Met ptt49er (Phillip) and MikeH (and Katie) yesterday. Couple of nice guys, despite what WoodWrangler says!! Scored some nice pegboard from ptt49er! Nope, no pics. Can't prove we were together! :rotflm:
  19. WoodWrangler

    A Couple Bowls

    Today I had to put the mustard monster to work ... so I took my try at a couple of bowls. Four went on the lathe, but only two came off finished. Unforunately the Walnut variations didn't make it because of STUPID USER mistakes. However, two others did. These are only about the 10th bowls...
  20. Hook

    A Couple more Tom Zieg Patterns

    Dalmation and Cherry: Just the Cherry: More Cherry: The last one took the better part of 3 evenings to cut, and they were stacked.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top