compressor

  1. jonnyfontaine

    SATAminijet 3000 hvlp

    Does anyone have any experiance with one of these guns and if so, could they recommend a compressor for it. I got the gun at a steal for $150 but the compressor only puts out 13cfm at 90psi and somewhere I read the Satamini jet 3000 needed like 20 cfm at 29psi. Will this gu work with my...
  2. merrill77

    timer solution for 3hp compressor?

    I will soon be running a few air lines in my shop and moving my compressor farther away. I expect I will not be able to eliminate all air leaks and I don't want it running unless I'm actively using it. I already know I won't always remember to turn the switch back off. So I'd like to put a timer...
  3. scsmith42

    Raleigh CL - 5 hp air compressor for $200.00

    Not mine. 5 hp, 60 gallon Campbell Hausfeld upright compressor for 200 bucks is a heck of a good deal, and a great setup for a home wood or auto shop. http://raleigh.craigslist.org/tls/2640971862.html
  4. J

    Sears Twin Cylinder Air compressor 115V $75

    Currently on RDU CL is a 30 year old, 115V Sears air compressor for $75. This same basic compressor that both Mt Gomer and I have, except smaller tank (12 gal) and 115 volt. Ad says"Air Compressor 115V/1 HP. Located near 1010 Road and HWY 50, or about six miles south of Garner. With regular oil...
  5. Flute Maker

    Which Air Compressor Quieter?

    Which type of air compressor is quieter >>???? in the $200 to $250 range
  6. W

    Puma air compressor

    Just curious if you guys have any experience with puma compressors. I have been debating on an IR 20 gallon upright. I was looking it over and Northern Tool a few weeks ago and saw a very similar looking Puma unit with a much more attractive price. Any input would be greatly appreciated!
  7. J

    Water separator for small air compressor

    You guys have any decent recommendations for a small water separator to be used with a 6-gallon pancake compressor? Mine is not oiled so I don't need a oil/water separator - not sure if they all do both. Would be nice if I could pick one up at a local store vs. Internet. I see several on...
  8. B

    Campbell Hausfeld 80 gallon four cylinder compressor

    Gloat and Hot deal :) While returning some stuff at Lowes, I saw that the Campbell Hausfeld 80 gallon compressor had been put on clearance from $799 down to $439.45. I asked the sales manager if he would go lower, so he made a phone call, and offered me $375. I countered with $300, and we...
  9. golfdad

    Air Compressor Help

    :eusa_thinWell after having to rebuild my HF compressor forthe second time im looking for a better one. Is there any advantage in a 2 stage compared to the single stage in the 20-30 gallon upright range
  10. S

    Husky 26 Gal Compressor - $70 (Apex)

    not mine http://raleigh.craigslist.org/tls/2287529743.html Husky 26 Gal Compressor - $70 (Apex) Date: 2011-03-26, 11:14AM EDT Reply to: sale-x5pjm-2287529743@craigslist.org [Errors when replying to ads?] Husky 26 Gal Compressor - upright or horizontal use and storage. Big tank - slow...
  11. Glennbear

    Air Compressor Recall

    The CPSC has announced the recall of quite a few air compressors. Although the recall was done in conjunction with DeVilbiss, affected models were marketed under several brands including Husky, Craftsman, Porter-Cable etc. Please refer to the recall notice for details ...
  12. NCTurner

    Compressor Gloat-STEAL

    Guys don't hate me, but I stole this nice Husky Quiet series 26 gal compressor. As per the original owner compressor does not work, runs for a min and stops. Got it home cleaned the motor and blew it out, drained about 3 cups of water out, and hey what do you know....runs like new. Oh the...
  13. NCTurner

    Manual For Husky Q26 Air compressor

    Does anyone own a Husky Q26 and would you be willing to scan/copy the manual for me?
  14. Bigdog72

    PC Pancake Compressor

    I have the basic Porter Cable compressor shown in the picture. About 2 years old with relatively light use. I have noticed that after the compressor shuts down, air escapes slowly. I have isolated the leak to the enclosed motor in the area of the slotted grill on the left side. The parts...
  15. gator

    Seeking Air Compressor Knowledge

    I have an older version (4-5 years old) of this HF compressor (3HP, 21 gal, oil lubed) http://www.harborfreight.com/3-hp-21-gallon-115-psi-cast-iron-vertical-air-compressor-94667.html Walked out in the back yard yesterday morning and heard the compressor running in the shop. Went out and it...
  16. Mt. Gomer

    DeWalt Compressor - Ral. CL

    Seems almost too good to be true but sometimes you get lucky... http://raleigh.craigslist.org/tls/1942047068.html Dewalt finishnailer Compressor - $40 (Pittsboro/Chapel Hill) Date: 2010-09-07, 9:00PM EDT Reply to: sale-nfjrr-1942047068@craigslist.org [Errors when replying to ads?]...
  17. Bas

    Photo sensor to control compressor

    There is a similar thread on Woodnet, but that one has already degenerated into petty bickering. I plan to soundproof the closet in my workshop and use it to house the DC and compressor. Of course, being out of sight, out of mind, I'm pretty sure that one day the compressor will come up in the...
  18. Y

    Air Compressor Wiring

    Hello all... If this is the wrong forum I apologize in advance. I have lurked around here for ages but have been reluctant to post.. in over my head and am seeking advice on wiring a Baldor 240 V 1.5 hp motor to an Emglo air pump I inherited. It is 1725 rpm and 18/9 amps. I am not a total...
  19. Bas

    Compressor recommendation

    I think it's time to get a new compressor. The one I have right now is El Cheapo from Harbor Freight, bought for the exorbitant price of $40. It's worked OK for the last three years, but it is LOUD, and runs fairly hot with associated oily smell. I will probably get a big stationary compressor...
  20. bluthart

    Grizzly H4518 Air Compressor?

    If anyone has this model, can you please take a photo of the interior of the pressure switch? (the plastic cover pops off) I had to repair mine and it's a little difficult to put back together, with the springs and all. Thanks for your help! :mrgreen:

Premier Sponsor

Our Sponsors

Top