chucks

  1. K

    chucks

    Anyone use this one? I was a WC today in Matthews and it was on sale. Or do I start with just this chuck
  2. L

    Grizzly chucks

    Has anyone used the Grizzly chucks? If so are they any good? http://www.grizzly.com/products/3-4-Jaw-Chuck-1-x-8-TPI/H7605 http://www.grizzly.com/products/4-Jaw-Chuck-For-Round-Pieces-1-x-8-TPI/G8784 Thanks, Jeff
  3. mbeach

    Lathe Tools and Chucks??? What to buy....

    I am wanting everyones opinion on what to buy.... Are these any good? http://www.pennstateind.com/store/LCHSS8.html?mybuyscid=6660618540 or do you have some others to recommend. Need a basic set to get me started. Also... what is a good relatively cheap chuck?
  4. Splinter

    Homemade Lathe Chucks

    I recently made a Longworth Chuck and a "Donut" Chuck to hold bowls while cleaning up the tenon on the bottom. The Longworth is on the left and the donut is on the right. The donut chuck has two rings for different size bowls.
  5. Mark Stewart

    PVC vacuume chucks

    In the Summer issue of Woodturning design, there is an article on how to make your own vacuume chuch. I am hoping some one else has read this. I have been looking to a vacuume chuck. So if you have read it what do you think? Thanks Mark
  6. L

    Grizzly chucks

    What is everyone's opinion of the 3 and 4 jaw chucks from Grizzly. Looking at the 1"x8 self centering type. http://www.grizzly.com/catalog/2009/Main/131 I would love to buy a better chuck but cash is tight. Thanks in advance, Jeff
  7. Trent Mason

    lathe chucks, your opinions

    On Saturday I got the Super Nova 2 on sale at Woodcraft. Have yet to get home and try it but will tonight. (I hope it fits my lathe and I don't need one of those "adapters" or whatever they're called) What types of chucks do you all have? Do you prefer the ones that grip a tenon or inside a...
  8. CarvedTones

    Tiny chucks - MT/arbor versus threaded

    Note to Mike - If you think my lathe is cute, wait until you see these chucks. :gar-Bi I have not succumbed yet; I am still focused on the small stuff. The chucks I am looking at would be used for spindle turning and usually with a live center on the other end. I am quickly discovering that...
  9. ScottM

    Sale on Oneway Chucks

    Rec'd this in an email. Thought I would pass it along. http://www.woodturnerscatalog.com/store/util/oneway_henry_taylor_sale?Partnerid=email130
  10. Truefire

    Lathe Chucks Oneway or collet type

    Hey guys could anyone that possibly owns any of the adjustable jaw type mini chucks inform me of the depth of the internal hole and the nominal internal diameter on most adjustable jaw chucks. Basically, the nominal size on most chucks when tightened completely down to include the bore through...
  11. W

    self-centering 4- jaw chucks

    Anybody have one of the self-centering chucks that woodcraft has in their sale paper that just came out. There are 3 different ones part #'s 146800,01,and 02 respectively. they are on sell for 69.99 with a savings of 15.00, anyone have one and care to comment on it. Wayne
    • wayne
    • Thread
    • chucks jaw selfcentering
    • Replies: 13
    • Forum: Woodturning
  12. B

    HELP!!!!!! New woodturner needs info on chucks for jet mini lathe

    Went to a klingspor woodturning class recently and had a fantastic time. Learned alot and also learned I have alot to learn. My question is about chucks used when making bowls. Does anyone have any input about the Barracuda 2 chuck I found on the internet? All the reviews at that site made...
  13. DaveO

    Onway Talon and PSI Barracuda chucks

    Has anyone ever intermingles jaws from these two chucks????? They look to be exact clones of each other. I would like to get some Cole jaws (flat jaws) for my Talon and would much rather pay the $30 for the PSI set that goes to the Barracuda, instead of the $90 for the identical looking Oneway...
    • DaveO
    • Thread
    • barracuda chucks onway psi talon
    • Replies: 5
    • Forum: Woodturning
  14. cskipper

    Lathe chucks at Woodcraft

    Woodcraft is having a sale on lathe drill chucks and Teknatool chucks, tool rest plus other turning items (Pinnacle turning tools, live centers...). Most are good through 11/30 some are good through 11/27.
  15. brenthenze

    four- (or three-)jaw chucks for a midi-lathe?

    Hi all, I picked up a Delta midi-lathe awhile back on clearance, and I'd like to add a decent chuck so that I can try doing some small bowls, goblets, etc. Any suggestions on what's a good chuck for this purpose? Anything I should watch out for? I haven't used one before, but I see that...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top