cedar

  1. steviegwood

    Need Plans for Cedar lined Chest

    Hi Y'all, does anyone have any or know where I can find some plans for a cedar lined oak chest? I have been wanting to make one for some time now and might be able to squeeze in some time to finally build one. Thanks. Steve
  2. coastal1

    New Cedar Adirondack projects

    Here is a pic of the unfinished chairs. I've been working on them over the holidays as time allowed. I still need to sand then finish them. These are built with some of the ERC I got from Alan in Little Washington a while back. I posted a few more photos of a small table also in the furniture...
  3. tjgreen

    Finish for western cedar

    Hello. I'm making a few picture frames out of western cedar - looking for a southwestern feel to match some family photos from a cross-country trip a few years back. I've never worked with it before, any suggestion on a good natural finish for them? Was thinking tung oil (my default choice), but...
  4. reprosser

    Red Cedar Bowl - NE

    Trying out a new shape with some fresh cut Red Cedar. One coat of Poly wipe so far. I think this bowl would look best with high buffed gloss. What do you think? I call it a tulip bowl. The rim reminds me of a tulip. 8" diameter x 5" high. I plan to turn off the tenon and have no foot on...
  5. sawduster

    Cedar Stag

    While cutting some plaques for Reggie ( jackleg ) I had an idea . I was using cedar with a walnut backer and wondered if I could do the same thing with one piece of wood . Sawed a 3/4 " piece out of a log, planed it, sawed it in half lengthwise , planed the cut, scrolled the stag ( my pattern )...
  6. Toothpick Holder

    Toothpick Holder

    Picked up a piece of cedar in Texas as souvenir. The red and purple are really nice, but don't show up well in photo.
  7. Truefire

    Anyone have cedar posts (rough) living near Greenville?

    Hey Guys does anyone oof you have any 8-10" diameter rough cut cedar posts or familiar with anyone near the Greenville area that may have such? I am looking for small logs basically cut from cedar trees that have been cured out, I want the bark intact and they need to be fairly stout to support...
  8. Truefire

    Needing cedar logs

    Hello gentleman, does any know where I could possibly find some cedar logs about 6-10" diameter ranging in lengths close to 10' or better. I would be willing to cut trees down if they were a nuisance or you just wanted to get rid of some cedar for some reason. Thanks for any and all help...
  9. 5Etek-mike

    Antique cedar wardrobe finally refinished

    Thank you all for allowing me to share this recent project with you. This wouldn't have been possible without the great help of Mac (Skysharks)!! :occasion1:icon_thum:eusa_clap:eusa_clap Mac invited my wife and I over to his tremendous shop last weekend to assist us with repairing one of...
  10. NZAPP1

    Looking for a piece of cedar

    :help: I am looking for a piece of cedar 3 x 3 x 24 to make a lamp. does any one have or know where I can get such a small piece? Thanks in advance :icon_thum
  11. R

    Finishing Cedar

    Need some help, please. I have used Teak and Danish Oil with good results on some walnut and mahogany. I like the warm un-glossy results:icon_thum. Now I have some left-over cedar (thanks, DaveO) I'll be using for some indoor ornaments. How will this soft wood finish out with the hardwood...
  12. sawduster

    Cedar

    A local nursery that i drive by every day has been building some structures and accents using long cedar logs. there has been a good sized pile of cutoffs near the road and I figured " whats the harm in asking ? " Well here is the result :mrgreen: .........easy, TracyP :rotflm: All I had...
  13. W

    Looking For Cedar

    I'm new to the area, recently moved to Raleigh from Minnesota. I'm starting to run out of my stash and I need to find new places to get lumber. I'm gearing up to make a few sets of Adirondack chairs for gifts and wondering where I could find Cedar. Looking for 4/4 and 8/4 boards, roughly 6"...
  14. JackLeg

    Cedar Run

    Here's a load of ERC I picked up today from ol' saw4you! Some pretty good stuff in there. One of the first things I want to do with some of the wider boards is make another Richfield pattern swing and finish it with clear General 450. Should turn out nice. Also had lunch today with ol'...
  15. Matt Schnurbusch

    I love the 'F' word... Free walnut & cedar on Raleigh CL

    This was posted on Sunday, and the pile has been picked through pretty well, but if you have some patients and aren't afraid of ants, I'm sure I missed some good wood. I didn't take a picture of the remains of the pile, but I do have pictures of my portion of the loot. Now I just have to figure...
  16. Kyle

    Looking for cedar cants or logs..

    Looking for 1000 bf of cants or logs ERC min 8-10" small end. also need some cypress..clear and clean 1 1/8" thick min width 8-9" length min 8'
  17. TracyP

    A Scrap Of Cedar Becomes......

    A scrap piece of cedar which if you haven't figured out yet:dontknow: :rotflm: Is my favorite wood. It is tough to work, and breaks apart a lot. I had three pen blanks "explode" on me while turning:BangHead:. I took my time and turned this cedar pen today. Thanks for looking! I am still...
  18. Ken Massingale

    Nice Free Cedar tree (Spartanburg, SC)

    Says it's 45" at 5', and 40 feet tall. http://greenville.craigslist.org/zip/761493077.html
  19. Joe Scharle

    Cedar shavings as mulch

    Is this stuff safe for plants or bushes? I've got a bag left over from my daughter's guinea pig days. Thanks in advance, Joe
  20. sawduster

    More fun with cedar

    just messing around with some of the cedar I got from Tracy Fishy fishy in the brook ....... not really sure where this one came from ....just fell outta my head The designs are mine using composites of Dover clip art all cut with #3 FDUR Thanx for lookin :mrgreen:

Premier Sponsor

Our Sponsors

Top