case

  1. Ken Massingale

    Wood Shotgun Case

    We have a new Mossberg 500 12 gauge pump, with an 18.5" and 28" barrel. I'd like to make a nice case for the shotty and barrels. Google isn't being helpful to find the formed foam liners. Any of you folks made cases for your firearms? Thanks for any info, tips, etc. Ken
  2. ebarr

    In case you are looking to be a woodworker

    http://www.youtube.com/watch?v=A7QT6PbQ1dc&feature=related A7QT6PbQ1dc very informative...I got the spending money on tools part mastered :rolf:
  3. ScottM

    Helpers needed for Klingspors Show case Raleigh

    North Carolina Woodworker is a co-sponosr for the Klingspor Showcase Sept 11th at the Klingspor store in Raleigh. To make the showcase successful we need a few people to assist. In particular we need help: 1 person from 3-6 on Friday Sept 10th to help with check in and setup 3 people from...
  4. N

    Homebuilt case for surface plate?

    Anyone have ideas on building a carrying/storage case for a granite surface plate? Woodcraft had them on sale so I got one. We'll see if it helps with sharpening. The problem is that it's big (2x9x12) and HEAVY! I haven't weighed it but the Woodcraft guy seemed to think it was 20 lbs or so...
  5. Joe Scharle

    Woodcraft Display Case

    Dan, here's what it looks like finished. View image in gallery
  6. Display Case from Woodcraft Plan

    Display Case from Woodcraft Plan

    • Joe Scharle
    • Media item
    • case display
    • Comments: 0
    • Album: Furniture
  7. Luckbox72

    Memorial Case

    Made the shadow box as a gift. It is for a memorial flag and the display. It is made of red oak. I cut down a 1"x 6" to rough width then used the cut off and with a locking miter joint attached it to the front to give the me e lip to hold the glass. I then used a couple different router...
  8. Mr. Lahey

    Need opinions on this book case design

    I designed bookshelves that will go on my living room wall. The big empty square in the center is where my fireplace and flat screen TV will be...so the shelves are built around it. I can't decide what joining method to use or how to best attach the shelves to the living room wall. Anyone have...
  9. J

    Just in case somebody needed a bandsaw

    :gar-Bi 36" bandsaw on raleigh CL for sale, not mine.... http://raleigh.craigslist.org/tls/1547121666.html
  10. NASCAR Display Case #2

    NASCAR Display Case #2

    This case was built using lumber I had milled from white oak tree's that I cut clearing my building lot in East Hartland CT back in 1998. It is filled with my NASCAR collectibles.
    • red
    • Media item
    • case display nascar
    • Comments: 0
    • Category: Member Galleries
  11. NASCAR Display Case #1

    NASCAR Display Case #1

    This case was built using lumber I had milled from white oak tree's that I cut clearing my building lot in East Hartland CT back in 1998. It is filled with my NASCAR collectibles.
    • red
    • Media item
    • case display nascar
    • Comments: 0
    • Category: Member Galleries
  12. tall case clock

    tall case clock

    • Phil S
    • Media item
    • case clock tall
    • Comments: 0
    • Category: Member Galleries
  13. IMG_1228

    IMG_1228

    • Phil S
    • Media item
    • case clock tall
    • Comments: 0
    • Category: Member Galleries
  14. tc_date

    tc_date

    date
    • Phil S
    • Media item
    • case clock tall
    • Comments: 0
    • Category: Member Galleries
  15. CrealBilly

    Case on Case question

    Today I started on my FIL's Firearm Display Cabinet, I got a lot of the QSRO jointed and planed and even managed to get some glue ups in clamps :) The plans are here and I'm sad to say they aren't too good. They built the whole thing out edge banded plywood and trim so the dimensions are all...
  16. gordonmt

    challange coin display case

    My son is an Air Force officer and I would like to make him a challenge coin display case for Christmas. For those who don't know what a challenge coin is, I have copied a short description. In World War I, a rich lieutenant had custom challenge coins minted for all those in his unit as a...
  17. S

    case full of wood

    .
  18. J

    Please nail my wallet shut, just in case.

    Currently on craigslist, in Chapel hill area are several items. First is a carbide dado set, that looks just like my old HF $19.99 set. Under saw blades is a used WWII for $90. I didn't pay that much new for either of mine. Please somebody help me hold my wallet shut!:rotflm:
  19. R

    Glass for a Trophy Case

    My son-in-law volunteered me to build a couple of trophy cases for my grandson's school. We're in the planning stages. These things will be big (7' tall x 6' wide) with a lot of glass. The doors will be sliding glass panels. All the track I've found is for 1/4" thick glass. Any one know what...
  20. ErnieM

    Harpsichord Project Part 24 - The Case is Finished

    Hi all, In Part 23 we finished the bench and marbled the side panels. Now we’ll protect the marbling with some poly, paper the rest of the case, and call this part of the project finished. First, the stand is finished with almond paint, gold bands, and papers. The paper strips were...
    • ErnieM
    • Thread
    • case finished harpsichord part project
    • Replies: 18
    • Forum: "How To" Forum

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top