Hey all
I am currently on the search for the following Templates that go with the 24" Omnijig 7116:
Model# 7121 24" Templet for 1/2" Tapered Sliding Dovetails
Model# 7120 24" Templet for 1/4" Half Blind Dovetails
Model # 7118 24" (Pins) Templet for 1/2" Hand Dovetails
Model # 7119 24"...
I built this router station last year and it is practically brand new. The router (3 hp Porter Cable )motor seams to have jammed in the housing. I can only turn it 180 degrees so I can not even remove the motor.:BangHead::BangHead::BangHead:
Anyone else had this problem? Should I put it in a...
Need help with router for cutting minature stile and rails for oak display cabinet. I have a 690 series in PC that burnt the ends when I made my first cut. Yes, I went slow because I questioned whether or not the router was heavy enough for the cut. I use this same router to cut cherry stiles...
I have a Porta Cable pancake type air compressor. Thursday morning it sounded different and I didn't have any air pressure. It had a small hole in the top and I could see metal. Broken rod. I took it to the factory service dealer in Greenville, SC. and they said they would call as soon as they...
Helped a friend build a wall in His Basement this weekend and there was a Neighbor who came over and really tried to take over. He cut 3 2x4's wrong but only 3/8 to short so I sent him to the truck looking for my dewalt board stretcher and he couldnt find it, He looked for 25 minutes. he came in...
Take a look at the images below. I was trying to dove the plywood shown for drawer sides. Either you can not dovetail plywood or I am doing something wrong. Any thoughts.
Thanks
I have an opportunity to pick up a PC7116 for about $100. Was wondering what you guys think of the jig and how easy it is to get the additional templates?
Looking at the price of these jigs new, I think I should get it.
Notice the new variable-tooth 10" blade in the local HD, and I think I saw the same blade on the New Yankee Workshop Unisaw. Does anyone here have this blade, and if so, is it worth the $$$?
The concept sounds good, a combination blade that gives smooth rips and crosscuts at the same time.
Let...
I thought someone on this site posted a picture of one of these some time back and was wondering if they are still made. It seems to me that I did see one somewhere on the PC site but that may have been during one of those late nite internet romps and my eyes may have been playing tricks on...
I wanted to seek advice on router size. I am currently looking at the Porter Cable 694VK (1 3/4 HP) and the Porter Cable 893PK (2 1/4 HP). I really do not know why I should spring for the extra $$$ for the extra HP. Any advice would be greatly appreciated.
Went to Lowes today with my birthday & Father's Day $$ burning a hole in my pocket. Lowes is having a clearance on the Ingersol Rand (IR) spray guns. The IR HVLP appears to be identical to the Porter Cable PCSH1 (?) HVLP gun except it's painted black instead of chromed. The IR gun is clearance...
I think PC is slipping. I heard their routers were the cat's pajamas and so bought a Porter Cable Model 890 router. Actually, I think my first one was an 891... Anyway, I will probably NOT buy another PC router. Issues:
1. It was supposed to come with both the 1/4" and 1/2" collets. Only...