Search results

  1. R

    Graco 395 FinishPro air assisted airless sprayer for sale

    Hello, Not a typical woodworking tool, but everything needs a good coating. I am selling a Graco 395 FinishPro air assisted airless sprayer. I just wrapped up spraying 2K finish on a large set of cabinets/doors and won't be needing this type of sprayer any further. It works great and includes...
  2. R

    Harvey Compass ST-1500 Slider

    I have no issues with any wobbling of the fence. My guess is they need to raise the outside of the slider with the legs so it sits in plane with the table saw top, or they didn’t tighten the fence correctly in the t-track (counterclockwise to tighten).
  3. R

    Harvey Compass ST-1500 Slider

    They may have improved their process as my order shipped within a few days. FedEx had a few weather delays but that was expected. I have a track saw and TSO guide rail as well - I still use that to make the initial cuts in sheet goods but then use the table saw for final dimensioning to ensure...
  4. R

    Good YouTubers to follow?

    I am finding it harder and harder to differentiate who is posting because of a paid sponsorship vs not. I like Rick Mainhart's list above. I also like "Guys Shop"
  5. R

    Harvey Compass ST-1500 Slider

    For those who have the Harvey Compass ST-1500 or the similar SawStop sliding table; I want to share two small upgrades I made to my Harvey. I recently purchased the Harvey sliding table when it was on sale around Christmas. I installed it on the left side cast iron wing similar to what I saw...
  6. R

    3/8 MDF

    Thanks everyone. The kind folks at the hardwood store of NC informed me they can order 3/8 MDF for me!
  7. R

    3/8 MDF

    Hi Everyone, Does anyone know where I can find 3/8 sheets of MDF? I am making kitchen cabinets. Doors will be 7/8 thick, rail and stile with a bead edge. I want the MDF panel to be flush with the back of the door, rabbeted to fit the groove in the rail and stile (using Whiteside 6003 bits). I...
  8. R

    For Sale Listings - Check out the Facebook page

    Is there an address for the Facebook page and is it viewable to those of us without Facebook?
  9. R

    Sold. Earlex 5000 for sale.

    Thanks gents. One other user reached out to me about the sprayer and may pick it up tomorrow. If that doesn’t work out I’ll let you know.
  10. R

    Sold. Earlex 5000 for sale.

    I have a used earlex 5000 hvlp. Used to spray cabinets and do some staining a few years ago but haven’t used it since. Turbine works well. Gun and pressure tubing could use some cleanup but was threaded let’s were all greased when last used. Includes 1.0, 1.5, 2.0 tips. $40. Located in Durham.
  11. R

    Free laguna bandsaw mobility kit

    Free laguna bandsaw motility kit to anyone who wants it. Used for a laguna 14 3000 saw but I think it also works on laguna 14 and 16 suv. Model information from the laguna website is in the first picture. Located in durham. Feel free to call or text 919-624-9443
  12. R

    Early 1900s vanity/dresser refinish

    That is beautiful! What did you use for the stripping?
  13. R

    iPad holder

    Thanks Wayne! My original idea was a fixed angle. Then when designing it my wife and I couldn’t agree on a good angle. And so was born the adjustable design. Of course, now I think her preferred angle was better...
  14. R

    iPad holder

    Hi folks, I have made a few laptop stands but was asked to make an iPad holder for a Christmas present. This is my own design but I hope you like it. Made it so the top can pivot to different angles. Used furniture connector bolt and some rubber washers to add friction. Tighten it down with the...
  15. R

    Home Office Projects ?

    Not very big but made a few of these laptop stands. Has a keyboard cutout for storage. Keeps the screen eye level. Only works if you have a keyboard and mouse though.
  16. R

    Bandsaw track adjustment screw stripped.

    I’d have to take apart the whole wheel assembly to have room to add a bolt on the inside. Any strengthening of the threads would be best on the outside I think. Appreciate the advice on grade 8
  17. R

    Bandsaw track adjustment screw stripped.

    Thanks everyone. Great idea regarding adding the steel plate to the outside and using a bolt through that. I could use through bolts at the four corners and that way not worry about the plate pulling off. I went ahead and tapped for a 3/8-16 bolt and it is working well. I figure if that strips...
  18. R

    Bandsaw track adjustment screw stripped.

    There is about 1/4 of sheet metal (two layers welded together) where the track adjustment bolt enters the frame behind the top wheel.
  19. R

    Bandsaw track adjustment screw stripped.

    Never heard of helicoil before but that looks to be the perfect solution. Thanks!
  20. R

    Bandsaw track adjustment screw stripped.

    I bought a used laguna 14” 3000 bandsaw around 6 months ago. It’s been working well but the blade tracking screw for the upper wheel started slipping. I removed the screw and the threads are fully stripped, as is the screw hole on the bandsaw. The only remedy I can think of is to tap a larger...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top