Search results

  1. Mike Camp

    Festool Tools on RDU CL

    Full disclosure this is my CL posting, but not my tools. I'm selling them for a friend that had to move out of the area on short notice. http://raleigh.craigslist.org/tls/4304896147.html
  2. Mike Camp

    Grizzley 18" Wood Bandsaw - $490 (Cary-Apex)

    Not mine... http://raleigh.craigslist.org/tls/3087041032.html Grizzley 18" Wood Bandsaw Cast Iron table, Heavy Duty 2 HP motor that runs on 110V or 220V setup now for 110V Adjustable fence. Runs good Perfect for bowl turners, home or commercial shop Don't waste your money on the cheap bench...
  3. Mike Camp

    Starting my Journey down that slippery Green slope

    Last week a guy at my company posted on our internal classifieds this 4.5 year old, lightly used Festool TS55 with a 42" rail, 55" rail, rail connectors, CT Midi, 48T blade and panther blade all in like new condition for about 60% of retail (translated: still pricey IMHO). I was only a few...
  4. Mike Camp

    TS 75 Plunge "Fest Tool" Cut Saw - $675 (Randleman, NC)

    Not mine. He's throwing in the 106" track as well making this a decent deal. I can't get over the resale value on Festool. TS 75 Plunge "Fest Tool" Cut Saw Hello! Like New! Used twice and then it sat in a closet for 4 years. Exact same saw as the New One "2012" Edition, but is $400.00...
  5. Mike Camp

    Grizzly 15" Planer on RDU CL

    Note mine... I would try get him down on the price, $700 seems a little high. Grizzly 15" Planer I have a Grizzly 15" planer with manual and extra blades (value $50-$100). This is a very nice heavy duty machine and at this price won't last long. First $700 takes it. 3HP motor 3 knife...
  6. Mike Camp

    Porter cable router - $60 (Raleigh) RDU CL

    Not mine. Maybe not a smoking price, but very reasonable considering they sell for around $125 new. Porter cable router I have a porter cable heavy duty router model 690 LR for sale good condition Location: Raleigh it's NOT ok to contact this poster with services or other commercial...
  7. Mike Camp

    $200 10" Delta Unisaw for Sale on RDU CL

    Someone please jump on this. I would be all over this if it would fit in my garage. The unifence alone is almost worth that much. It looks like the company is located up in Brier Creek near the airport. 10" Delta Unisaw for Sale US Case Corporation is selling it's 10" Delta Unisaw. The item...
  8. Mike Camp

    General Contractor Recommendations for Apex/Cary Area

    My wife and I are getting quotes right now for a possible screened-in porch and a first floor master addition to our house in Apex. Is anyone here either a contractor willing to give a quote or know of a good contractor that you've used in the past? Thanks!
  9. Mike Camp

    Festool ES 125 EQ - $75 RDU CL

    Not mine. Brand new I think it is $175. Festool ES 125 EQ
  10. Mike Camp

    Paslode Cordless Framing Gun - $110 (Cary)

    Not mine. Not exactly for woodworking, but great for building a woodworking shop. http://raleigh.craigslist.org/tls/2765367707.html
  11. Mike Camp

    Craftsman 10" table saw cast iron - $25 (Fuquay varina)

    Not mine. I'm pretty sure this is one of the classic Craftsman belt drives. Needs a good bit of TLC but the price is right. http://raleigh.craigslist.org/tls/2761036520.html
  12. Mike Camp

    Sheets of Formica and/or Plastic Laminate in the Triangle Area

    Does anyone know of a cheap spot to get horizontal grade laminate (1/16" thick) in or around the triangle? The BORG has it for $55 (a little on the high side for my taste) a full sheet and I really don't need whole sheets (4' x 8'), partial sheets of at 30" in one dimension would probably work...
  13. Mike Camp

    Contractor Saw Restoration Complete

    All done. Well still have to fiddle with the fence alignment a little bit and cut the ZCI, but all the fun stuff is done. Special thanks to Bruce (junquecol) for letting me have this saw out of his personal collection for a very fair price, and helping me along the way including showing and...
  14. Mike Camp

    Aligning Table Saw Fence

    So I've been doing a ton of reading on aligning my new Delta T2 fence (Biesemeyer clone) and I've read in a handful of places that you want the rear of the fence to be about .020" farther away from the blade than the front of the fence. I assume this is to prevent kickback from occurring via the...
  15. Mike Camp

    Contractor Table Saw Vibration Noise

    Just got my contractor table saw started up. It doesn't pass the nickel test right now. I ran the saw without the link belt on and the motor runs smooth. With the link belt on it runs, but is not exactly quiet. I checked the link belt orientation and it is correct. The bearings on the arbor...
  16. Mike Camp

    Paging Sully - 15" Crescent Jointer on Raleigh CL

    Not mine. Looks like it is fully rusted and ready for restoration, but I must say the paint doesn't look all that bad from the picture. Not sure if the price is good or not, but I don't see these pop up on craigslist very often. Crescent 15" Joiner - $700 (Youngsville) 3 phase built-in...
  17. Mike Camp

    Electrolysis Rocks for Rust Removal!

    I've been cleaning/derusting/restoring a contractor table saw I got from junquecol's stash, and decided to give electrolysis a try. My setup involved two anodes which are 1/2" rebar zip tied to some old brake rotors I had lying around after I helped my neighbor change his brakes. The rotors have...
  18. Mike Camp

    Hitachi 12" Sliding Compound Miter Saw w/ Stand - $100 on RDU CL

    Not mine. http://raleigh.craigslist.org/tls/2662392748.html Hitachi 12" Slide Compound Saw model C 8FB on Roussea Miter saw super stand. Price is Firm. Also have 8" Makita Table Saw New Blade heavy homemake stand ($50.00 firm) 919-870-1935 Location: Raleigh it's NOT ok to...
  19. Mike Camp

    SawStop Contractor Table Saw $1500 on Raleigh CL

    Not mine. Looks like you could save a few bucks if you were in the market for one. Also he has it posted on lumberjocks for $1400 so you might ask for the special woodworker discount http://www.lumberjocks.com/topics/30792 ;) http://raleigh.craigslist.org/tls/2643718448.html
  20. Mike Camp

    Dewalt Thickness Planer (Mebane) RDU CL - $150

    Not mine... http://raleigh.craigslist.org/tls/2593560775.html Dewalt Thickness Planer - $150 (MEBANE) Date: 2011-09-11, 5:08PM EDT Reply to: sale-p5fpe-2593560775@craigslist.org [Errors when replying to ads?] This is a like new Dewalt Thickness Planer. Has been used very little and works...

Our Sponsors

LATEST FOR SALE LISTINGS

Top