Results 1 to 15 of 28
Thread: Basement Subfloor Questions
01-11-2017, 09:27 AM #23
President Corporate Member
- Join Date
- Mar 2010
- Cary, NC
- Visit Freq
- 6.92 visits/week
Re: Basement Subfloor Questions
I can bring some of the samples (leftovers) to the next Board Meeting - we should have one soon, BTW. That picture looks close but as Mike mentioned there are channels to let water flow under the foam in mine. The channels are just a bevel in the foam towards all 4 edges. It is 2'x2' T&G interlocking pieces. It is a floating floor - you leave a 1/4" gap around the edges and use some molding (1/2" quarter round) on top the edges and let it float underneath that.
The OVRX tolerates slightly uneven floors, but the Dri-Core has to be shimmed level - another advantage.
Here's the thread from back when I installed mine.
http://www.ncwoodworker.net/forums/s...ad.php?t=46429You can't make the same mistake twice. The second time it becomes a choice, rather than a mistake.
"May the grain be with you" - Roy Underhill
The following user says Thank You to KenOfCary for this useful post:
By gfernandez in forum General WoodworkingReplies: 10Last Post: 05-28-2009, 03:42 PM
By LeftyTom in forum Workshop DiscussionReplies: 0Last Post: 04-12-2009, 08:44 AM
By mgoins in forum Workshop DiscussionReplies: 9Last Post: 11-27-2008, 02:35 PM
By Chipper in forum Power Tools and Their UseReplies: 10Last Post: 02-06-2008, 09:53 PM
By BMT5000 in forum Workshop DiscussionReplies: 6Last Post: 06-13-2007, 05:42 PM