North Carolina Woodworker is aimed primarily at Woodworkers in North Carolina. We will accept automatically users from NC, VA, TN, SC.
All others registrant's accounts will be put into Moderation, once they have verified their email address. Most of these registrants will be declined by our staff. This has nothing to do with you personally.. It has to do with our desire to maintain the local nature of our discussions, functions, etc.
However, we do accept non-residents in a few special cases.
People who, in the staff's judgment, offer special skills that are not represented in depth with our current membership.
People who have a special interest in woodworking in North Carolina and/or work in the state.
People who represent manufacturers and/or retail vendors of woodworking tools.
Other exceptions may be made as deemed appropriate by the staff of www.ncwoodworker.net
However, registrants that do not meet the automatic registration requirement , MUST provide information as to why they should be considered for non resident membership. This is done by filling in the "Non Resident Join Request" field of the registration application. Remember that a non resident registration is placed into moderation. When the staff reviews these accounts, their attention is placed on the "Non Resident Join Request" field. If it is NOT filled in, the registration will automatically be declined.
Off TopicOur new off topic forum. This is the place to discuss non-woodworking or non-site related topics. Be advised that the posting rules for this forum are same as all other forums.
» Announcements
Everyone Log on at 9:00PM Thursday December 4th to set a members online record.
Featured Photos
by Handturnedbowls
· · · Member Galleries
24848 photos 9957 comments
__________________ Wife changed my perspective. I need want some additional tools. I need want a
multi-spindle line borer - Found one!!!! Could I? Should I? Do I????
pocket hole machine - unlikely in 2008
Festool sander and vacuum -told I don't need 2 not going to happen
Edge bander - unlikely this decade
oscillating edge sander - unlikely in 2008
floor model chisel or slot mortiser - unlikely in 2008
Years ago they had a 'That's Jake' one panel cartoon in the N&O. Still miss it.
I can still remember my favorite where it said that no matter how crazy the specs if they were written on the back of a big enough check all was ok.
The cartoon showed Jake holding a hammer and a wall of a house (hung from a cable) being swung (by about 4 guys) into Jake's hammer to get a nail hammered in.
I 
" I get knocked down but I get up again" - Chumbawamba 
Linear Mode
