Raleigh Lumber Run #2 - May/31/08 - Page 2

Mike Davis · 05-19-2008, 06:22 AM

I'll take 100bf of the 4/4 KD Quarter Sawn White oak.

And 50 ft of 8/4 green black walnut

cskipper · 05-19-2008, 06:41 AM

If you find any QSS or walnut in you odd stuff and someone can bring it at least as close as GSO maybe Barbara can hold it for me. You know me, any thin scraps are especially appreciated. Also is you have a few bf of wide maple. Again, only if someone is heading west.

skysharks · 05-19-2008, 07:44 AM

I'm in for ERC at least 100 bdft. The dried stuff if you can.

Glennbear · 05-19-2008, 08:13 AM

Resisting - RESISTING - RESISTING........ Aw heck!!! I'll be there to buy some leftovers for drawer runners, vice faces etc . which is all I can realistically use right now since my new wood rack is already overflowing

woodylarry · 05-19-2008, 09:43 AM

I would like 100bf of the green Walnut
50bf 8/4
50bf 4/4

Thanks,

rita541 · 05-19-2008, 12:59 PM

Jeff
Got any blue pine?
So you sell smaller amounts of BF?
I don't use large amounts at a time. Is 10 Bf too small an amount to buy?
Rita

Turtlewood · 05-19-2008, 06:12 PM

Hey Jeff?

Any 8/4 AD/KD Maple left over? I'd be interested in that too.

Please let me know.

Thanks,
-Kevin

Mrfixit71 · 05-19-2008, 08:45 PM

Jeff,

Please put me down for:
50 bf of 8/4 Black Walnut
50 bf of 4/4 Black Walnut
75 bf of 4/4 QSWO
75 bf of 4/4 Flat Sawn Maple

jeff... · 05-19-2008, 09:02 PM

Originally Posted by John Jankowski

Any stuff for turning larger (greater than 12" bowls) and larger hollow forms (8" dia by 16" tall?

I'll have to let Jack answer you on that one - I don't have any chunks that big that's not spoken for.

Thanks

jeff... · 05-19-2008, 09:07 PM

Originally Posted by mkepke

Jeff - if you have clean white 4/4 maple, I'll take 200 bf. If you can find some clean white 8/4 to go with it, put me down for another 100 bf of that.

I'm also interested in thick green stock for turning. Can Jack cut some 4"+ thick material in walnut, persimmon or another close-grained hardwood (more m-m-m-maple ?) ?

-Mark

Mark I can help you with 4/4 but sold out of the 8/4 - If you can take green Jack may be able to help you - Jack I'll leave the responding on 8/4 (clean / white) Maple up to you.

Thanks

jeff... · 05-19-2008, 09:09 PM

Originally Posted by Bas

ARG! More wood! Actually, I need 30bf of 5/4 KD Red Oak. If you have any of that, well, I'd like you make you not have it

I'd also like one board of the 8/4 walnut, something around 5bf.

We'll supply your wood fix there Bas

Thanks

jeff... · 05-19-2008, 09:11 PM

Originally Posted by toolman

Bas

Wood Buying can be highly addictive! I know, I want some sooooo bad, but the boss said no.

Bummer man a real bummer

jeff... · 05-19-2008, 09:12 PM

Originally Posted by Bigdog72

Put me down for 75 bd ft of the 4/4 flat sawn maple. I am sure I can make this run!!

Gotcha and Thanks

jeff... · 05-19-2008, 09:15 PM

Originally Posted by Mike Davis

I'll take 100bf of the 4/4 KD Quarter Sawn White oak.

And 50 ft of 8/4 green black walnut

Gotcha covered Mike and thanks

jeff... · 05-19-2008, 09:18 PM

Originally Posted by cskipper

If you find any QSS or walnut in you odd stuff and someone can bring it at least as close as GSO maybe Barbara can hold it for me. You know me, any thin scraps are especially appreciated. Also is you have a few bf of wide maple. Again, only if someone is heading west.

Cathy - I'll let Jack Know too

Thanks

05-19-2008, 06:22 AM	#16
Mike Davis Member Name: Mike City: Westfield State: NC County: Stokes Join Date: Dec 2005 Age: 51 Posts: 615 Threads: 44	Re: Raleigh Lumber Run #2 - May/31/08 I'll take 100bf of the 4/4 KD Quarter Sawn White oak. And 50 ft of 8/4 green black walnut

05-19-2008, 06:41 AM	#17
cskipper Moderator Advisory Panel Name: Cathy Skipper City: Forest City State: NC County: Rutherford Join Date: Oct 2005 Age: 52 Posts: 4,909 Threads: 380	Re: Raleigh Lumber Run #2 - May/31/08 If you find any QSS or walnut in you odd stuff and someone can bring it at least as close as GSO maybe Barbara can hold it for me. You know me, any thin scraps are especially appreciated. Also is you have a few bf of wide maple. Again, only if someone is heading west. __________________ Cathy Skipper Two little words that can make the difference: START NOW. -Mary C. Crowley

05-19-2008, 07:44 AM	#18
skysharks Member Name: John Macmaster City: Fayetteville State: NC County: Cumberland Join Date: Oct 2006 Posts: 408 Threads: 44	Re: Raleigh Lumber Run #2 - May/31/08 I'm in for ERC at least 100 bdft. The dried stuff if you can. __________________ Long ago when men cursed and beat the ground with sticks, it was called witchcraft. Today it's called golf.

05-19-2008, 08:13 AM	#19
Glennbear Member Name: Glenn City: Baskerville State: VA County: Mecklenburg Join Date: Jan 2008 Age: 59 Posts: 708 Threads: 62	Re: Raleigh Lumber Run #2 - May/31/08 Resisting - RESISTING - RESISTING........ Aw heck!!! I'll be there to buy some leftovers for drawer runners, vice faces etc . which is all I can realistically use right now since my new wood rack is already overflowing __________________ " I get knocked down but I get up again" - Chumbawamba

05-19-2008, 09:43 AM	#20
woodylarry Member Name: Larry City: Raleigh State: NC County: Wake Join Date: Jan 2008 Posts: 19 Threads: 1	Re: Raleigh Lumber Run #2 - May/31/08 I would like 100bf of the green Walnut 50bf 8/4 50bf 4/4 Thanks, __________________ Measure once, cut as many times as it takes... _________________

05-19-2008, 12:59 PM	#21
rita541 Member Name: rita cunningham City: Apex State: NC County: Chatham Join Date: May 2007 Posts: 90 Threads: 6	Re: Raleigh Lumber Run #2 - May/31/08 Jeff Got any blue pine? So you sell smaller amounts of BF? I don't use large amounts at a time. Is 10 Bf too small an amount to buy? Rita

05-19-2008, 06:12 PM	#22
Turtlewood Member Name: Kevin City: Cary State: NC County: Wake Join Date: Dec 2005 Age: 34 Posts: 132 Threads: 19	Re: Raleigh Lumber Run #2 - May/31/08 Hey Jeff? Any 8/4 AD/KD Maple left over? I'd be interested in that too. Please let me know. Thanks, -Kevin

05-19-2008, 08:45 PM	#23
Mrfixit71 Member Name: Rich City: Pittsboro State: NC County: Chatham Join Date: Jan 2006 Posts: 11 Threads: 1	Re: Raleigh Lumber Run #2 - May/31/08 Jeff, Please put me down for: 50 bf of 8/4 Black Walnut 50 bf of 4/4 Black Walnut 75 bf of 4/4 QSWO 75 bf of 4/4 Flat Sawn Maple

05-19-2008, 09:02 PM	#24
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by John Jankowski Any stuff for turning larger (greater than 12" bowls) and larger hollow forms (8" dia by 16" tall? I'll have to let Jack answer you on that one - I don't have any chunks that big that's not spoken for. Thanks __________________ Mills Custom Sawing

05-19-2008, 09:07 PM	#25
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by mkepke Jeff - if you have clean white 4/4 maple, I'll take 200 bf. If you can find some clean white 8/4 to go with it, put me down for another 100 bf of that. I'm also interested in thick green stock for turning. Can Jack cut some 4"+ thick material in walnut, persimmon or another close-grained hardwood (more m-m-m-maple ?) ? -Mark Mark I can help you with 4/4 but sold out of the 8/4 - If you can take green Jack may be able to help you - Jack I'll leave the responding on 8/4 (clean / white) Maple up to you. Thanks __________________ Mills Custom Sawing

05-19-2008, 09:09 PM	#26
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by Bas ARG! More wood! Actually, I need 30bf of 5/4 KD Red Oak. If you have any of that, well, I'd like you make you not have it I'd also like one board of the 8/4 walnut, something around 5bf. We'll supply your wood fix there Bas Thanks __________________ Mills Custom Sawing

05-19-2008, 09:11 PM	#27
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by toolman Bas Wood Buying can be highly addictive! I know, I want some sooooo bad, but the boss said no. Bummer man a real bummer __________________ Mills Custom Sawing

05-19-2008, 09:12 PM	#28
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by Bigdog72 Put me down for 75 bd ft of the 4/4 flat sawn maple. I am sure I can make this run!! Gotcha and Thanks __________________ Mills Custom Sawing

05-19-2008, 09:15 PM	#29
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by Mike Davis I'll take 100bf of the 4/4 KD Quarter Sawn White oak. And 50 ft of 8/4 green black walnut Gotcha covered Mike and thanks __________________ Mills Custom Sawing

05-19-2008, 09:18 PM	#30
jeff... Member Name: jeff... City: State: NC County: Granville Join Date: Mar 2006 Posts: 5,455 Threads: 395	Re: Raleigh Lumber Run #2 - May/31/08 Originally Posted by cskipper If you find any QSS or walnut in you odd stuff and someone can bring it at least as close as GSO maybe Barbara can hold it for me. You know me, any thin scraps are especially appreciated. Also is you have a few bf of wide maple. Again, only if someone is heading west. Cathy - I'll let Jack Know too Thanks __________________ Mills Custom Sawing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Raleigh Lumber Run 05/18/08	jeff...	Wood	58	06-03-2008 07:02 PM
Raleigh KD Lumber run #4	jeff...	Wood	35	10-18-2007 08:50 PM
Raleigh KD Lumber run #4	jeff...	Wood	51	09-15-2007 02:57 PM
Addition to Raleigh KD Lumber run #3	jeff...	Wood	4	09-06-2007 03:07 AM
Lumber sources, Raleigh	Tom Dunn	Where Can I Find, Buy or Sell	2	04-23-2006 07:21 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode