4/4 Red Oak KD Lumber Run?

[Jeff Mills]

Anyone ready for a Red Oak KD Lumber Run? Scott and I have been talking again... We're planning on mix of quarter and flat sawn. Seeing gas prices are on the rise again, I best get off my bum and get busy soon.

Thanks

-------------------------------------------------------------------

* $3.25 a Board Foot for 4/4 Quarter Sawn Red Oak

* $2.00 a Board Foot for Flat Sawn Red Oak

* Wider FS boards (over 12") will go somewhere in between $2.00 ~ $3.25 a board foot depending on defect/quality.

* Applies only to North Carolina Woodworker members.

* Cull is Cull.

-------------------------------------------------------------------

Reserve (updated 16-Jun-2009)
Tarhead 100BF QS
Tarhead 20BF FS
SkySharks 200 BF QS
Bigdog72 75BF QS
Steve Cogs 50 BF QS
eyekode 30BF QS
JackLeg one board
TruckJohn a few boards
FredP Dibs on cull
SawDuster Dibs on Fred's cull
sediener 50 BF Q/F mix
ednl 50BF QS
Dan Bowman 75BF QS
lottathought 50 BF QS
Matt Schnurbusch 75 ~ 100BF FS
BobcatBob 80BF QS (Looking forward to finally meeting you)
khb1526 75BF QSWO - I think there was a log or two of WO so I may have that much?
Ehardin 100BF FS Oak
TruckJohn a few boards of QS
Canuck 200 BF FS
Rob 200 BF FS
Sawduster a few wide boards
ScottM 50 BF FS
Splint Eastwood 25BF of 5/4 QSWO
scrollski 25BF FS
TomM 20BF of QS 4/4 red oak
timf67 50 BF 5/4 QSWO

Approximate Total
right around 2000BF / 1000 or so BF left

[toolman]

Just posting so I will know when it is ready..

[BobcatBob]

Originally Posted by scsmith42

Wayne, either late July or early August.

Scott

Just wondering if there is an update to this time frame.

Bob

[Canuck]

Originally Posted by Canuck

Hi there, Jeff & Scott.....

Please put me down for 200 BF of flat sawn.

Thanks a bunch!

Wayne

I too, was wondering about when the LR would be.

Hadn't heard and wasn't added to the original list.

Sure looking forward to this run of fine RO!

Wayne

[scsmith42]

Jeff has been delayed a couple of weeks due to a new grandbaby! He's back in Raleigh now and slated to bring me a load of wood for the kiln soon.

Once I receive it, it will be about 30 days.

I'll also have some 5/4 QSWO available that I'm milling this weekend and early next week - probably up to 1,000 bd ft. I may have some 20" wide 5/4 QSRO available as well, if anybody is interested.

Either Jeff or I will update the thread as soon as we know for sure. Thanks much.

Scott

[Turtlewood]

Hey Scott,

Thanks for the update.

I'm interested in the 5/4 QSWO that you're milling up. Do you know how much you'll be offering it for?

Thanks,
-Kevin

[eyekode]

20" wide 5/4 QSWO?!? You could do something really special with that!

[Rob]

Put me down for 200 BF of flat sawed. When will this be ready?

[Jeff Mills]

Hey guys - I really have to apologize, my wife has been in CA for the past 10 weeks helping my daughter with my 2 year old granddaughter while she was carrying my grandson. Long story short my daughter was on bed rest and in the hospital several weeks because she went into premature labor @ 24weeks. I'm happy to say my grandson was delivered @ 30 weeks 10 weeks early @ 3lbs 7.5oz and is still in the NICU but doing very well, my wife is due home Aug 7th.

While my wife has been away I have been taking care of my teenage son and daughter. It's pretty rough doing the work of both mom and dad and because of this I have not had time to get out to the sawmill. However next weekend, I will be sawing so I should be able to get lumber to Scott Smith within the next couple weeks.

Please accept my apology... Family always comes first, before anything else... Thanks for your understanding.

I'll keep everyone posted in this thread as the lumber run moves along.


Thanks

[FredP]

congradulations on the new arrival Jeff! hope all is well with mom and baby.

[sawduster]

Woo Hoo Mr Mills


Scott I would be interested in that wide stuff . Only a board or two unless there is a minimum
I see killer scrolling panels in those Wait 'till you see what I'm doing with the " diving boards " I got from Jeff some time back


congratulations again bro Jeff

[Jeff Mills]

Originally Posted by FredP

congradulations on the new arrival Jeff! hope all is well with mom and baby.

Thanks Fred - yep mom (my daughter) is recovering from her c-section and grandson is coming right along in the NICU there in San Diego Naval hospital. The nurse tried to get me to hold him before I left, but man he's so small and all, I said nah... I wait till he gets a little bigger.



Thanks

[ScottM]

Jeff, congrats on the new addition. Glad to hear all will be OK.


Please put me down for 50 BF FS

[Splint Eastwood]

Originally Posted by scsmith42

Jeff has been delayed a couple of weeks due to a new grandbaby! He's back in Raleigh now and slated to bring me a load of wood for the kiln soon.

Once I receive it, it will be about 30 days.

I'll also have some 5/4 QSWO available that I'm milling this weekend and early next week - probably up to 1,000 bd ft. I may have some 20" wide 5/4 QSRO available as well, if anybody is interested.

Either Jeff or I will update the thread as soon as we know for sure. Thanks much.

Scott

Scott, I am interested in @25BF of 5/4 QSWO, maybe more. About how much per bf?

Thanks,
Matt

[Bigdog72]

Originally Posted by Splint Eastwood

Scott, I am interested in @25BF of 5/4 QSWO, maybe more. About how much per bf?

Thanks,
Matt

Matt - See the first post in this thread for pricing.

[scsmith42]

Originally Posted by sawduster

Woo Hoo Mr Mills


Scott I would be interested in that wide stuff . Only a board or two unless there is a minimum
I see killer scrolling panels in those Wait 'till you see what I'm doing with the " diving boards " I got from Jeff some time back

There will be some available and no minimum. Can't wait to see pix of the "diving board" project!