 » Upcoming Events | | Fall 2009 Raffle drawing this Friday (11/20): See This Thread For Details |  | 
06-22-2009, 11:22 PM
|
#1 | | Bottle Stopper makers Name: Phillip City: Lexington State: NC County: Davidson Join Date: Jun 2008  06-22-2009, 11:22 PM
When you do the final assembly by applying either the Epoxy or the CA and then turn the stopper into the top does any of yours get real tight about 75% of the way in? If so how do you get it to turn the rest of the way in?
__________________
Phillip
My Saw Is Making Dust 
Time waits for no one. Treasure every moment you have. You will
treasure it even more when you can share it with someone special. (Arthor unknown)
| | Views: 315 | |
06-23-2009, 06:56 AM
|
#2 |
Name: Rob City: Sanford State: NC County: Lee Join Date: Mar 2008 Age: 45 Avg Visit Freq/Week
= 6.84 over 180 days | Re: Bottle Stopper makers
Bee's Wax |  
| | |
06-23-2009, 07:13 AM
|
#3 |
Name: Phillip City: Lexington State: NC County: Davidson Join Date: Jun 2008 Avg Visit Freq/Week
= 6.92 over 180 days | Re: Bottle Stopper makers
Originally Posted by Rob  Bee's Wax
__________________
Phillip
My Saw Is Making Dust
Time waits for no one. Treasure every moment you have. You will
treasure it even more when you can share it with someone special. (Arthor unknown)
| |
| | |
06-23-2009, 08:12 AM
|
#4 |
Name: Barbara City: Urbanna State: VA County: Middlesex Join Date: Dec 2008 Avg Visit Freq/Week
= 5.48 over 180 days | Re: Bottle Stopper makers
I always drill the hole a little deeper than suggested so the extra glue will have a place to go. With the non threaded stoppers if the diameter of the hole is really close to he diameter of the tenon, sometimes the trapped air will not escape well. I use the threaded stoppers and dry fit each before using the glue.
If you guys use beeswax, won't that affect the holding ability of the glue? | |
| | |
06-23-2009, 10:19 PM
|
#5 |
Name: Rob City: Sanford State: NC County: Lee Join Date: Mar 2008 Age: 45 Avg Visit Freq/Week
= 6.84 over 180 days | Re: Bottle Stopper makers
I have never glued them in, never have had to, the ones I make hold fine. | |
| | |
06-23-2009, 10:48 PM
|
#6 |
Name: Phillip City: Lexington State: NC County: Davidson Join Date: Jun 2008 Avg Visit Freq/Week
= 6.92 over 180 days | Re: Bottle Stopper makers
Just got through with one of the BOW stoppers and I did dry fit it with some wax and it went on fine then put in a few drops of CA - screwed the stopper in and it stopped about a 32nd from going all the way up  Pictures to follow as soon as I can round up a camera
__________________
Phillip
My Saw Is Making Dust
Time waits for no one. Treasure every moment you have. You will
treasure it even more when you can share it with someone special. (Arthor unknown)
| |
| | |
06-23-2009, 11:16 PM
|
#7 | | Moderator
Name: Bob City: Hillsborough State: NC County: Orange Join Date: May 2007 Avg Visit Freq/Week
= 7.00 over 180 days | Re: Bottle Stopper makers
No glue dude...  . Once the threads are in the stopper, it is unlikely to come out on it's own anyway. As mentioned above, cut the threads a little deeper than you need. For added assurance, I chase the threads with a tap. When your done with your stopper, apply a tiny bit of beeswax on the threads. Screw the top on... viola, your done.
__________________
To everything... turn, turn, turn!
| |
| | |
06-24-2009, 07:15 AM
|
#8 |
Name: Phillip City: Lexington State: NC County: Davidson Join Date: Jun 2008 Avg Visit Freq/Week
= 6.92 over 180 days | Re: Bottle Stopper makers
Originally Posted by woodArtz No glue dude... . Once the threads are in the stopper, it is unlikely to come out on it's own anyway. As mentioned above, cut the threads a little deeper than you need. For added assurance, I chase the threads with a tap. When your done with your stopper, apply a tiny bit of beeswax on the threads. Screw the top on... viola, your done. Bob, the stoppers that I have been making and selling like hot cakes are the ones with the cork screw - do you not think those need a little bit more security holding with the glue since they will be pulled on while pulling the cork out - I don't know 
__________________
Phillip
My Saw Is Making Dust
Time waits for no one. Treasure every moment you have. You will
treasure it even more when you can share it with someone special. (Arthor unknown)
| |
| | |
06-24-2009, 07:41 AM
|
#9 | | Moderator
Name: Bob City: Hillsborough State: NC County: Orange Join Date: May 2007 Avg Visit Freq/Week
= 7.00 over 180 days | Re: Bottle Stopper makers
ah... nevermind. .gif "Drogar BigGrin(DBG)")
__________________
To everything... turn, turn, turn!
| |
| | |
06-24-2009, 12:32 PM
|
#10 |
Name: Rob City: Sanford State: NC County: Lee Join Date: Mar 2008 Age: 45 Avg Visit Freq/Week
= 6.84 over 180 days | Re: Bottle Stopper makers
Originally Posted by woodArtz ah... nevermind. Yeah, I misunderstood the type of stoppers he was using also. | |
| | |
06-24-2009, 06:37 PM
|
#11 |
Name: Phillip City: Lexington State: NC County: Davidson Join Date: Jun 2008 Avg Visit Freq/Week
= 6.92 over 180 days | Re: Bottle Stopper makers
__________________
Phillip
My Saw Is Making Dust
Time waits for no one. Treasure every moment you have. You will
treasure it even more when you can share it with someone special. (Arthor unknown)
| |
| | |
06-25-2009, 02:52 PM
|
#12 | | Senior Moderator
Events Director
Name: Scott City: Cary State: NC County: Wake Join Date: Jul 2007 Avg Visit Freq/Week
= 6.53 over 180 days | Re: Bottle Stopper makers
__________________
Making Saw Dust With a Scroll Saw
Scott
| |
| | |
06-25-2009, 03:17 PM
|
#13 |
Name: Fred City: franklinton State: nc County: franklin Join Date: Jun 2006 Age: 52 Avg Visit Freq/Week
= 6.84 over 180 days | Re: Bottle Stopper makers
drill a little deeper. exess glue needs someplace to go. the tap is prolly tapered some also. you need to tap deep enough to get full threads for the full length. dry fit and make sure its deep enough to accomadate the glue.
you dont need massive amounts of glue. a couple drops will do ya. what glue are you useing? thick would be my choice to give more open time. if the glue is setting too quickly that may be the problem. I've had that happen on pen tubes....... .gif "Drogar Cry(DBG)") | |
| | |
06-25-2009, 07:03 PM
|
#14 |
Name: Phillip City: Lexington State: NC County: Davidson Join Date: Jun 2008 Avg Visit Freq/Week
= 6.92 over 180 days | Re: Bottle Stopper makers
Originally Posted by FredP what glue are you useing? thick would be my choice to give more open time. if the glue is setting too quickly that may be the problem. I've had that happen on pen tubes.......
Med CA - I will get some thick on my next order - thanks
__________________
Phillip
My Saw Is Making Dust
Time waits for no one. Treasure every moment you have. You will
treasure it even more when you can share it with someone special. (Arthor unknown)
| |
| | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
| 
| » Stats |
Members: 3,663
Threads: 25,093
Posts: 263,607
Top Poster: DaveO (14,701)
| | Welcome to our newest member, quaffin1 | |
.gif "Drogar Laugh(DBG)")
