North Carolina Woodworker
Calendar Voting Has Begun Read This First

Go Back   North Carolina Woodworker > Woodworking > General Woodworking
Reload this Page Custom Inlay Banding
Register Frequently
Asked Questions		 Members
List		 Calendar Search Today's Posts Mark Forums Read

Notices

Residency requirements

North Carolina Woodworker is aimed primarily at Woodworkers in North Carolina. We will accept automatically users from NC, VA, TN, SC.

All others registrant's accounts will be put into Moderation, once they have verified their email address. Most of these registrants will be declined by our staff. This has nothing to do with you personally.. It has to do with our desire to maintain the local nature of our discussions, functions, etc. However, we do accept non-residents in a few special cases.

  • People who, in the staff's judgment, offer special skills that are not represented in depth with our current membership.
  • People who have a special interest in woodworking in North Carolina and/or work in the state.
  • People who represent manufacturers and/or retail vendors of woodworking tools.
  • Other exceptions may be made as deemed appropriate by the staff of www.ncwoodworker.net

However, registrants that do not meet the automatic registration requirement , MUST provide information as to why they should be considered for non resident membership. This is done by filling in the "Non Resident Join Request" field of the registration application. Remember that a non resident registration is placed into moderation. When the staff reviews these accounts, their attention is placed on the "Non Resident Join Request" field. If it is NOT filled in, the registration will automatically be declined.


» Announcements
September 8 - Voting Begins
September 27 - Southern Raleigh Shop Crawl
October 11 - Fall Gathering in Asheville
October 24 & 25 - Klingspor Extravaganza - Hickory, NC
Featured Photos
by Alan in Little Washington
· · ·
Member Galleries
21740 photos
6210 comments
by Smithwoodworks
· · ·
Member Galleries
21740 photos
6210 comments
by nelsone
· · ·
Member Galleries
21740 photos
6210 comments
by Mrfixit71
· · ·
Furniture
47 photos
150 comments

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 07-02-2008, 02:38 PM   #1
 
Touchwood's Avatar
 
Name: Don Paterson
City: Raleigh
State: NC
County: Wake
Join Date: Oct 2006
Posts: 140
Threads: 25
Avg Visit Freq/Week
= 2.86 over 66 days
Custom Inlay Banding
Hi Gang,

I've started on a partner desk for a couple in Annapolis using Kyle Edwards beautiful unsteamed walnut..but this post isn't about me!!

The customer wants an inlay on the top. Someone in North Carolina Woodworker pointed me to Matt Furjanic...I forget who it was now, but thanks a bunch anyway. I wanted something special...had some nice birdseye maple, sent it to Matt..and FOUR DAYS later he mailed me 30 feet of the nicest stuff I've ever seen.

This custom inlay banding is exactly 1/2" wide, precisely and uniformly 50 mils thick (bit more than 3/32"). He put two veneer layers of walnut and maple on the edges of the birdeye. He is a true artist...there's nothing out there commercially that I've seen that's even close to what he does.

His website

www.inlaybanding.com

has a bunch of standard designs that are pretty nice too.

The sample I'm sending has just one coat of finish. I'm suggesting the Brusso drawer pulls to the customer as well..but I bet he goes nuts over the inlay.

Don



Last edited by toolferone; 07-02-2008 at 08:31 PM. Reason: fixed link
Show Printable Version Email this Page   Quote this post in a PM to Touchwood    
Old 07-02-2008, 03:16 PM   #2
 
Larry Rose's Avatar
 
Name: Larry Rose
City: Ahoskie
State: NC
County: Hertford
Join Date: Apr 2006
Posts: 455
Threads: 95
Avg Visit Freq/Week
= 4.45 over 66 days
Re: Custom Inlay Banding
I bought some ebony and holly stringing from him and was 100% satisified with the quality and speed of shipping. If anyone needs banding and stringing supplies you can't go wrong with Kyle Edwards.
Show Printable Version Email this Page   Quote this post in a PM to Larry Rose    
Old 07-02-2008, 08:32 PM   #3
Moderator
Advisory Panel
 
toolferone's Avatar
 
Name: Tom Ferone
City: Raleigh
State: NC
County: Wake
Join Date: Jul 2005
Age: 46
Posts: 1,781
Threads: 138
Avg Visit Freq/Week
= 7.00 over 66 days
Re: Custom Inlay Banding
Looks great Don!!
__________________
Tom
www.dreamshopwoodworks.com
Show Printable Version Email this Page   Quote this post in a PM to toolferone    
Closed Thread
  North Carolina Woodworker > Woodworking > General Woodworking

Tags
banding , custom , inlay

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with inlay ebarr General Woodworking 4 06-05-2007 11:49 AM
Inlay Help JRD General Woodworking 2 02-16-2007 07:22 PM
Solid Wood Edge Banding? Canuck Tips &Tricks 19 05-30-2006 01:13 PM
Cross banding help mshel General Woodworking 6 11-27-2005 05:53 PM
dentil banding misterbeal Where Can I Find, Buy or Sell 10 11-10-2005 09:26 AM

» Log in
User Name:

Password:

Not a member yet?
Register Now!
» Stats
Members: 1,840
Threads: 14,773
Posts: 159,662
2nd Top Poster: jeff... (5,858)
Welcome to our newest member, jhumphrey
» Today's Birthdays
b4man
Highland Woodworking Link

All times are GMT -4. The time now is 02:23 PM.

Contact Us - North Carolina Woodworker - Archive - Top

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0