 | 
08-27-2008, 06:04 PM
|
#1 |
Name: Glenn City: Baskerville State: VA County: Mecklenburg Join Date: Jan 2008 Age: 59 Avg Visit Freq/Week
= 6.69 over 180 days |
I finally got my "old arn" shaper cleaned up and running but it appears that I need bearings for the arbor since it has quite a bit of vibration and noise. Before I start tearing into and hunt down bearings I want to make sure that it will be cost effective since some of the cutters I got with it need shapening. Is there someone around that sharpens 1/2" bore shaper cutters ? these are HSS. Thanks.
__________________  " I get knocked down but I get up again" - Chumbawamba |  
| | |
08-28-2008, 09:48 AM
|
#2 | | Senior Moderator
Name: Scott City: Cary State: NC County: Wake Join Date: Jul 2007 Avg Visit Freq/Week
= 6.53 over 180 days |
Check with Raleigh Saw. Tom aka Toolferone works there.
__________________
Making Saw Dust With a Scroll Saw
Scott
| |
| | |
08-28-2008, 10:35 AM
|
#3 |
Name: Travis City: Wake Forest State: NC County: Wake Join Date: Dec 2005 Avg Visit Freq/Week
= 5.87 over 180 days |
Don't know if Raleigh Saw sharpens them or not. If they don't you might check dynamic saw. You would have to ship them, but I have heard good things about them. I personally have not had any shaper or router bits sharpened, but I need to do so as well.
As for the bearings, there are several places locally in Raleigh that sell them and have good prices. Any chance you can get a router spindle for the shaper? If you can, then I would say it would definitely be worth bringing back to "full life".
__________________ I think I am in remission. I am all tooled out.
OK, I did buy a few clamps, but I sold some too.
and a cordless drill...........
and a RO sander
and another cordless drill, but that is all!!! | |
| | |
08-30-2008, 08:42 AM
|
#4 |
Name: jabguit City: Raleigh State: NC County: Wake Join Date: Jul 2008 Age: 50 Avg Visit Freq/Week
= 3.50 over 172 days |
Raleigh Saw does sharpen router bits; seems only natural that they'd do shaper cutters as well.
__________________
Jack Briggs
Briggs Guitars
| |
| | |
08-30-2008, 08:45 AM
|
#5 | | Senior Moderator
Name: Scott City: Cary State: NC County: Wake Join Date: Jul 2007 Avg Visit Freq/Week
= 6.53 over 180 days |
Glenn, I am up at LKG this weekend. If you want to meet me, I can take them to Raleigh Saw for you.
__________________
Making Saw Dust With a Scroll Saw
Scott
| |
| | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|   » Stats |
Members: 2,322
Threads: 17,312
Posts: 188,044
2nd Top Poster: jeff... (6,607)
| | Welcome to our newest member, Git-wood | | » Today's Birthdays | |
None
| |
All times are GMT -4. The time now is 04:32 AM.
