 » Online Users: 55 | | 10 members and 45 guests | | Alan in Little Washington , bitbight , BobcatBob , Canuck , Cuprousworks , froglips , GregSmith , jeff... , roweathers , SteveCogs | | Most users ever online was 180, 04-21-2008 at 11:18 PM. |
 | | 
06-18-2008, 09:51 AM
|
#1 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Need Help!
I am looking for a Craftsman Dovetail Fixture 9-25450.  I went to EBay but could not find it.  Has anyone got and idea where I can find? I have the Box Joint attachment for it but cannot use it unless I have the Dovetail Fixture. Any help  will be greatly appreciated. Terry 
__________________  "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle  |  
| | |
06-18-2008, 09:57 AM
|
#2 |
Name: wayne City: Mocksville State: NC County: Davie Join Date: Sep 2006 Avg Visit Freq/Week
= 1.99 over 95 days | Re: Need Help!
I've got an old craftsman dovetail fixture I've had about 20 years. I will check and see if I can find model # anywhere on it.
Wayne | |
| | |
06-18-2008, 10:10 AM
|
#3 |
Name: Mike City: Westfield State: NC County: Stokes Join Date: Dec 2005 Age: 51 Avg Visit Freq/Week
= 6.78 over 95 days | Re: Need Help!
I have an old Stanley, wouldn't happen to be the same? Does anybody know? | |
| | |
06-18-2008, 10:20 AM
|
#4 |
Name: Ken Massingale City: Liberty State: SC County: Anderson Join Date: Nov 2005 Age: 62 Avg Visit Freq/Week
= 6.85 over 95 days | Re: Need Help!
I think you mean 9254550. It's at http://www.sears.com/shc/s/p_10153_12605_00925455000P
Also it's frequently on sale.
__________________
Inside every 'old' man is a young man wondering what the heck happened!  | |
| | |
06-18-2008, 04:15 PM
|
#5 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Re: Need Help!
Originally Posted by Ken Massingale  I rechecked the Part Number and it is 9-25450, but I am going to look at he site above at my Sears here in Fayetteville. This P/N came of the Box Joint attachment that goes with this unit. Thanks! Terry
__________________ "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle | |
| | |
06-18-2008, 05:05 PM
|
#6 |
Name: Ken Massingale City: Liberty State: SC County: Anderson Join Date: Nov 2005 Age: 62 Avg Visit Freq/Week
= 6.85 over 95 days | Re: Need Help!
Originally Posted by Terry I rechecked the Part Number and it is 9-25450, but I am going to look at he site above at my Sears here in Fayetteville. This P/N came of the Box Joint attachment that goes with this unit. Thanks! Terry It's perhaps not the one for the jig I thought. I checked mine and the templates don't have PN's on them. Is it for a 16" jig?
Ken
__________________
Inside every 'old' man is a young man wondering what the heck happened! | |
| | |
06-18-2008, 05:20 PM
|
#7 |
Name: Barbara Forman City: Greensboro State: NC County: Guilford Join Date: Nov 2005 Avg Visit Freq/Week
= 4.27 over 95 days | Re: Need Help!
Terry,
I just went out and found my old craftsman dovetail jig. It does not have a model number. However, it's 11 inches long and 6 inches wide. On the bottom is stamped 29L-96.
On the off chance it's what you need, it's yours.
__________________  Barbara
"No one cares how much you know until
they know how much you care "
| |
| | |
06-18-2008, 08:19 PM
|
#8 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Re: Need Help!
Originally Posted by Ken Massingale It's perhaps not the one for the jig I thought. I checked mine and the templates don't have PN's on them. Is it for a 16" jig?
Ken Ken,
I purchased the Box Joint Template Set Back in 12/04 which has a 1/2" Box Joint Template and a 9/32" Template The Box Joint Template Part Number 925550 Owner's Manual 171.255500. ??????? Terry
__________________ "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle | |
| | |
06-18-2008, 08:21 PM
|
#9 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Re: Need Help!
Originally Posted by b4man Terry,
I just went out and found my old craftsman dovetail jig. It does not have a model number. However, it's 11 inches long and 6 inches wide. On the bottom is stamped 29L-96.
On the off chance it's what you need, it's yours. I beleive that might be it! Terry
__________________ "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle | |
| | |
06-18-2008, 08:35 PM
|
#10 |
Name: Jim Hancock City: Apex State: NC County: Wake Join Date: Nov 2006 Avg Visit Freq/Week
= 6.78 over 95 days | Re: Need Help!
I have a Model 315.25790 that you can have if it is what you need. It is a 12" unit. | |
| | |
06-18-2008, 08:42 PM
|
#11 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Re: Need Help!
Originally Posted by Terry I beleive that might be it! Terry Check this site out http://www.vermontamerican.com/Suppo...roductManuals/
Click on Industrial Dovetail Jig Item 23461 This is what I need if anyone has one like it. Terry 
__________________ "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle | |
| | |
06-18-2008, 08:48 PM
|
#12 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Re: Need Help!
Originally Posted by Jim Hancock I have a Model 315.25790 that you can have if it is what you need. It is a 12" unit. I appreciate that Jim, but still trying to get the unit if I can as I have a new set of templates that have never been used. I should have bought the Dovetail Jig when I bought the Templates but the were out of it. and I just went in the dumb mode and never bought it.  Thanks! Terry
__________________ "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle | |
| | |
06-19-2008, 05:55 AM
|
#13 |
Name: Barbara Forman City: Greensboro State: NC County: Guilford Join Date: Nov 2005 Avg Visit Freq/Week
= 4.27 over 95 days | Re: Need Help!
If the one shown on the Vermont site isn't just like mine, it's awfully close.
I'm happy to mail it to you. It weighs nothing.
Consider it repayment for all you've taught me by reading your post!
PM your address.
__________________ Barbara
"No one cares how much you know until
they know how much you care "
| |
| | |
06-19-2008, 06:29 AM
|
#14 |
Name: Ken Massingale City: Liberty State: SC County: Anderson Join Date: Nov 2005 Age: 62 Avg Visit Freq/Week
= 6.85 over 95 days | Re: Need Help!
Morning Terry,
That's the same jig as the Craftsman I mentioned. I had a brain burp yesterday, sorry. The part number on the Craftsman manual is 25450 (unassembled) and 25455 (assembled). It's a 16" DT jig, and a darn good one at that. All the part numbers are the same in my manual as the online one you posted.
I'll suggest posting a 'want to buy' over at BT3Central.com. There was a feeding frenzy there a couple of times when Sears had the jigs for $100 and less.
__________________
Inside every 'old' man is a young man wondering what the heck happened! | |
| | |
06-19-2008, 08:09 AM
|
#15 |
Name: Terrence P. Rielly City: Fayetteville State: NC County: Cumberland Join Date: Dec 2005 Age: 63 Avg Visit Freq/Week
= 3.39 over 95 days | Re: Need Help!
Originally Posted by Ken Massingale Morning Terry,
That's the same jig as the Craftsman I mentioned. I had a brain burp yesterday, sorry. The part number on the Craftsman manual is 25450 (unassembled) and 25455 (assembled). It's a 16" DT jig, and a darn good one at that. All the part numbers are the same in my manual as the online one you posted.
I'll suggest posting a 'want to buy' over at BT3Central.com. There was a feeding frenzy there a couple of times when Sears had the jigs for $100 and less. Thanks Ken,
Barbara has one and is going to send it to me. Thank you for helping me with this also. I sure am glad that I have woodworkers like you that know there stuff. Had I been smart I would have followed through and got the jig after the B/O was filled. Again Thanks! Terry
__________________ "Go as far as you can see, when you get there, you will be able to see further, but never forget where you started from." Thomas Carlyle | |
| | | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|   | » Stats |
Members: 1,931
Threads: 15,235
Posts: 165,162
2nd Top Poster: jeff... (6,004)
| | Welcome to our newest member, Berta | |
